{"product_id":"abb-dfe02-ethernet-modbus-tcp-ethernet-ip-communication-module","title":"ABB DFE02 Ethernet Modbus TCP EtherNet\/IP Communication Module","description":"\u003ch2\u003eABB DFE02 Ethernet Communication Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eABB DFE02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e37262-4-0369566\u003c\/strong\u003e Communication Module, operates as a dedicated hardware component for high-speed Ethernet-based fieldbus connectivity within ABB Freelance 2000 and ACS drive platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDFE02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany \/ Various\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e127 mm x 70 mm x 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 deg C to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e2.5 W (via host backplane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocol Support\u003c\/td\u003e\n\u003ctd\u003eModbus TCP\/IP, EtherNet\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Interface\u003c\/td\u003e\n\u003ctd\u003e10\/100 Mbps (RJ45)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDFE02\u003c\/strong\u003e module facilitates deterministic data exchange by integrating directly into the host drive backplane, enabling high-speed communication over standard industrial Ethernet. The module architecture is engineered to support the timing requirements of EtherNet\/IP and Modbus TCP\/IP protocols, ensuring that control loops maintain synchronization without exceeding latency budgets. Firmware flash compatibility allows for network-wide updates to support evolving communication standards, while the deterministic handling of data packets prevents command collision during heavy network traffic. The internal bus communication velocity is optimized to ensure that drive parameterization and status monitoring signals are processed within the host controller’s scan cycle.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the DFE02 require an external 24 VDC power supply?\u003c\/p\u003e\n\u003cp\u003eA: No. The DFE02 module is designed to draw its internal logic power directly from the host drive or controller communication slot, eliminating the need for external power wiring.\u003c\/p\u003e\n\u003cp\u003eQ: How are IP addresses assigned to the DFE02 module?\u003c\/p\u003e\n\u003cp\u003eA: The module supports both static IP assignment via configuration software and dynamic assignment via DHCP, depending on the network architecture requirements of the Freelance 2000 or 800xA environment.\u003c\/p\u003e\n\u003cp\u003eQ: Is the DFE02 hot-swappable?\u003c\/p\u003e\n\u003cp\u003eA: No. The drive must be de-energized and the internal DC link capacitors discharged before the module is inserted or removed from the communication slot to prevent damage to the backplane pins.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eEnsure the module is inserted into the designated communication slot of the ACS550 or ACS800 drive until the locking mechanism engages. When routing Ethernet cabling, maintain a minimum separation distance from power conductors to prevent electromagnetic interference. Shielded Category 5e or higher Ethernet cables are required for all installations to ensure signal integrity. Verify that the RJ45 port connection is secure and protected from mechanical strain, as vibrations in the drive environment can lead to intermittent link failures. Following installation, use the system configuration software to confirm that the module is recognized and that the diagnostic LEDs reflect an active, fault-free status.\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":42915432300634,"sku":"DFE02","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/50_021908ae-7354-4f2e-b60d-b54d2083ad99.jpg?v=1770862760","url":"https:\/\/www.spareoil.com\/products\/abb-dfe02-ethernet-modbus-tcp-ethernet-ip-communication-module","provider":"SpareOil Automation","version":"1.0","type":"link"}