{"product_id":"abb-do810-3bse008510r1-s800-i-o-digital-output-module","title":"ABB DO810 3BSE008510R1 S800 I\/O Digital Output Module","description":"\u003ch2\u003eABB DO810 3BSE008510R1 Digital Output Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for high-density discrete signal actuation in ABB AC 800M and System 800xA platforms, the \u003cstrong\u003eABB DO810\u003c\/strong\u003e (\u003cstrong\u003e3BSE008510R1\u003c\/strong\u003e Digital Output Module) provides direct physical and electrical execution of 24 VDC output switching for industrial field devices.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDO810 (3BSE008510R1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.26 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e102 mm x 119 mm x 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Dissipation\u003c\/td\u003e\n\u003ctd\u003e3.2 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Capacity\u003c\/td\u003e\n\u003ctd\u003e16 Channels (2 isolated groups of 8)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control \u0026amp; Output Characteristics\u003c\/h3\u003e\n\u003cp\u003eThe DO810 output architecture utilizes high-side (sourcing) switching organized into two electrically isolated banks. This configuration effectively prevents ground loop propagation and ensures localized fault containment if a field actuator shorts to ground. Each of the 16 channels is equipped with electronic current limiting and short-circuit protection, safeguarding the module internal circuitry from excessive load demands. The module integrates with various Module Termination Units (MTUs) such as the TU810 and TU830 to provide high-density field wiring.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the DO810 support hot-swapping during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the DO810 supports hot-swapping. The module can be extracted and inserted while the S800 I\/O station is powered. Ensure that the system controller is configured to manage the module removal without triggering an emergency shutdown of the associated field actuators.\u003c\/p\u003e\n\u003cp\u003eQ: Can the DO810 drive inductive loads directly?\u003c\/p\u003e\n\u003cp\u003eA: The DO810 is designed to drive resistive and light inductive loads (e.g., solenoids, relays). For highly inductive loads, external suppression diodes must be installed at the actuator to protect the internal high-side switching transistors from inductive flyback voltages.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the compatible MTU (e.g., TU810, TU814) onto the DIN-rail, ensuring the grounding tab provides a low-impedance path to the cabinet earth.\u003c\/li\u003e\n\u003cli\u003eTerminate all field actuators to the MTU terminals; verify the load current per channel does not exceed the 0.5 A continuous limit.\u003c\/li\u003e\n\u003cli\u003eSeat the DO810 module onto the MTU by aligning the backplane connectors; listen for the mechanical lock engagement.\u003c\/li\u003e\n\u003cli\u003eVerify the status of the front-panel diagnostic LEDs upon system power-up to confirm the module is communicating correctly with the Modulebus.\u003c\/li\u003e\n\u003cli\u003eUse the 800xA engineering interface to execute a forced-output test on individual channels to verify field actuator functionality before full system commissioning.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":42870827319386,"sku":"DO810 3BSE008510R1","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/42_791a1af7-af52-4d85-b4e8-78a2829d42e0.jpg?v=1771050778","url":"https:\/\/www.spareoil.com\/products\/abb-do810-3bse008510r1-s800-i-o-digital-output-module","provider":"SpareOil Automation","version":"1.0","type":"link"}