{"product_id":"amm52-centum-yokogawa-dcs-analog-input-multiplexer-module","title":"AMM52 CENTUM Yokogawa DCS Analog Input Multiplexer Module","description":"\u003ch2\u003eYokogawa AMM52 Analog Multiplexer Module\u003c\/h2\u003e\n\u003cp\u003eConfigured for sequential signal conditioning in Yokogawa DCS and PLC infrastructures, the \u003cstrong\u003eYokogawa AMM52\u003c\/strong\u003e (\u003cstrong\u003eAMM52\u003c\/strong\u003e) operates as a dedicated voltage input multiplexer module within Remote I\/O (RIO) rack platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAMM52\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.40 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard RIO module form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e≤ 4 A (5 V DC backplane)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e4 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Signal\u003c\/td\u003e\n\u003ctd\u003e1-5 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Impedance\u003c\/td\u003e\n\u003ctd\u003e≥ 1 MΩ (powered ON)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control and Signal Multiplexing Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe AMM52 facilitates the integration of process instrumentation by multiplexing four independent voltage inputs into a single data stream for processing by the host controller. Because the architecture is non-isolated, signal integrity relies on a strict single-point grounding strategy at the field-to-cabinet interface to mitigate common-mode noise. The module provides high input impedance (≥ 1 MΩ), which prevents loading effects on sensitive field transmitters. In applications requiring 4-20 mA HART loop protocol connectivity, the module functions in tandem with external shunt resistors to convert current loops into the 1-5 V DC input range. The 1-second data refresh cycle is optimized for steady-state process monitoring; however, users should account for this latency when designing control loops that rely on rapid signal updates.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the AMM52 support hot-swap replacement during active process operation?\u003c\/p\u003e\n\u003cp\u003eA: No, the AMM52 does not support hot-swapping. The host rack must be de-energized or the specific slot power isolated before removing or installing the module to prevent electrical damage to the backplane bus.\u003c\/p\u003e\n\u003cp\u003eQ: Is internal Cold Junction Compensation (CJC) provided for thermocouple inputs?\u003c\/p\u003e\n\u003cp\u003eA: No, the AMM52 does not implement internal CJC. If the module is used for thermocouple-based temperature monitoring, external cold junction compensation or a dedicated transmitter must be utilized to linearize the low-level DC signal before it reaches the AMM52 inputs.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Mounting\u003c\/strong\u003e: Ensure the RIO rack slot is free of debris. Slide the module into the guide rails and confirm the mechanical locking tabs are secure. Do not force the module if resistance is encountered, as this may damage the backplane pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Given the non-isolated nature of the module, ensure all field cable shields are tied to a clean, low-impedance ground bus. Prevent ground loops by ensuring that the field instruments and the AMM52 share a common reference point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Cabling\u003c\/strong\u003e: Use shielded twisted-pair cabling for all input signals. Keep signal lines physically separated from high-voltage AC lines or variable frequency drive (VFD) cabling to prevent induced noise on the 1-5 V DC signal range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration\u003c\/strong\u003e: Confirm that the external shunt resistor values are correctly sized if converting 4-20 mA current loops. Verify that the input signal levels do not exceed the ±30 V DC maximum allowable input voltage to prevent hardware failure.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43576267047002,"sku":"AMM52","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/422.1_bedda929-78f6-4185-bc73-5ec640c81c29.jpg?v=1782876103","url":"https:\/\/www.spareoil.com\/products\/amm52-centum-yokogawa-dcs-analog-input-multiplexer-module","provider":"SpareOil Automation","version":"1.0","type":"link"}