{"product_id":"analog-termination-panels-triconex-9761-210-tricon-v9-v10-series","title":"Analog Termination Panels Triconex 9761-210 Tricon V9\/V10 Series","description":"\u003ch2\u003eTRICONEX 9761-210 Tricon V9\/V10 Series Termination Panel\u003c\/h2\u003e\n\u003cp\u003eConfigured for continuous voltage and current loop validation in Tricon V9\/V10 SIS racks, the \u003cstrong\u003eTRICONEX 9761-210\u003c\/strong\u003e (\u003cstrong\u003e9761-210\u003c\/strong\u003e Analog Input External Termination Panel) provides direct physical\/electrical execution. The hardware routes field-derived 4-20 mA transmitter loops to specialized analog input cards, converting the signals via embedded resistors to establish unified data paths across the system backplane network.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e9761-210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTRICONEX (Schneider Electric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e2.2 cm x 12.4 cm x 12.6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;= 2.5 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Count\u003c\/td\u003e\n\u003ctd\u003e16 or 32 independent channels (depending on configuration)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Conversion\u003c\/td\u003e\n\u003ctd\u003e250 ohm precision resistors convert 4-20 mA current to 0-5 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoop Power Protection\u003c\/td\u003e\n\u003ctd\u003e16 positive terminals (+), current-limited via 180 ohm series resistors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRedundant Supply\u003c\/td\u003e\n\u003ctd\u003eDual 24 VDC external power sources with internal diode ORing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003e1500 VDC dielectric isolation (field to module side)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurge Protection\u003c\/td\u003e\n\u003ctd\u003eBuilt-in 1500 V surge suppression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiagnostics\u003c\/td\u003e\n\u003ctd\u003eOpen-circuit detection per channel, LED indicators\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Compatibility\u003c\/td\u003e\n\u003ctd\u003e0 to 5 VDC, -5 to +5 VDC, and HART analog input modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTermination Style\u003c\/td\u003e\n\u003ctd\u003eScrew terminals, accepts 12-24 AWG copper wire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eIEC 61508 SIL3, UL1059, CE, ATEX Zone 2, IP20 protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTriple Modular Redundancy and Safety Integrity\u003c\/h3\u003e\n\u003cp\u003eThe termination panel architecture supports a fault-tolerant interface network designed to maintain triple modular redundancy (TMR) 2oo3 processing operations. Galvanic isolation rated at 1500 VDC divides the external field wiring loops from the downstream I\/O modules, which stops transient surges from damaging the active processing cards. The dual redundant 24 VDC supply architecture implements diode ORing to supply continuous field loop power, enforcing fail-safe state execution boundaries. These integrated conditioning layers allow the subsystem to operate within strict IEC 61508 SIL3 safety control guidelines.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What boundaries govern hot-swap operations for the 9761-210 panel assembly?\u003c\/p\u003e\n\u003cp\u003eA: The passive field interface layout allows for hot-swap interventions. Technicians perform the physical installation steps while the secondary or parallel redundant I\/O module channels remain fully energized, which avoids triggering false process trips or logic solver interruptions.\u003c\/p\u003e\n\u003cp\u003eQ: How does the internal resistive network condition the current loop signals?\u003c\/p\u003e\n\u003cp\u003eA: The panel routes incoming transmitter current through factory-soldered 250 ohm precision resistors to translate 4-20 mA signals into a 0-5 VDC range. Concurrently, the 16 positive terminals restrict overcurrent faults using individual 180 ohm series resistors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the panel assembly vertically onto standard DIN rail networks inside the enclosure cabinet. Verify that the routing cables connecting the panel to the Tricon analog input modules are locked completely into their headers. Terminate the field transmitter lines using the integrated screw terminals, restricting connections to 12-24 AWG copper wire. Apply a consistent torque value of 0.5-0.6 N·m on all terminal clamps. Ground the external cable shielding arrays directly to the main low-impedance facility instrument ground bus to suppress electromagnetic interference (EMI). Route these low-voltage analog paths through independent raceways away from heavy AC mains cabling.\u003c\/p\u003e","brand":"Triconex","offers":[{"title":"Default Title","offer_id":43736214503514,"sku":"9761-210","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/204_8b82b80f-db23-4b2e-998a-eec475535673.jpg?v=1785120117","url":"https:\/\/www.spareoil.com\/products\/analog-termination-panels-triconex-9761-210-tricon-v9-v10-series","provider":"SpareOil Automation","version":"1.0","type":"link"}