{"product_id":"ati3s-001-yokogawa-centum-vp-series-datasheet-technical-manual","title":"ATI3S-001 Yokogawa CENTUM VP Series Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eYokogawa ATI3S-001 CENTUM VP Series Terminal Block\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYokogawa ATI3S-001\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eATI3S-001\u003c\/strong\u003e Pressure Clamp Terminal Block, operates as a dedicated hardware component for physical field signal termination within Yokogawa FIO platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eATI3S-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.2 kg (0.44 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e120 mm x 80 mm x 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C (Extended industrial window)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive hardware routing link (No active system power draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannel Capacity\u003c\/td\u003e\n\u003ctd\u003e8 Connection Points (Compatible with AAI135, AAP135 modules)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnection Type\u003c\/td\u003e\n\u003ctd\u003eTool-free, maintenance-free pressure clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Voltage\u003c\/td\u003e\n\u003ctd\u003e24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Current\u003c\/td\u003e\n\u003ctd\u003e0.5 A per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInsulation Resistance\u003c\/td\u003e\n\u003ctd\u003e100 M Ohm minimum at 500 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDielectric Strength\u003c\/td\u003e\n\u003ctd\u003e1500 V AC for 1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurge Absorber\u003c\/td\u003e\n\u003ctd\u003eNot integrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing Material\u003c\/td\u003e\n\u003ctd\u003eFlame-retardant thermoplastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Boundaries\u003c\/td\u003e\n\u003ctd\u003e5 to 90% RH, non-condensing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Instrumentation Properties\u003c\/h3\u003e\n\u003cp\u003eThe terminal block interfaces external field instruments with localized processing nodes using a tool-free pressure clamp termination system. The structural layouts preserve raw loop values for 4-20 mA HART loop protocol transmitters by enforcing physical trace isolation boundaries across all 8 processing points. To shield the matching single-channel analog I\/O modules from external field-side faults, the design provides an internal 1500 V AC dielectric strength barrier. This continuous physical separation cuts down common-mode electrical noise and stops ground loop deviations from propagating into the central ESB\/ER backplane node matrix.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the tool-free pressure clamp interface react to prolonged mechanical plant vibrations?\u003c\/p\u003e\n\u003cp\u003eA: The pressure clamp mechanisms maintain constant physical spring tension against the inserted conductor wire. This layout resists vibration-induced screw loosening, preventing intermittent contact and high resistance points in the 4-20 mA loop pathway.\u003c\/p\u003e\n\u003cp\u003eQ: Can this terminal block assembly be detached from the I\/O node without disconnecting individual field wires?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the block functions as a detachable interface connection layer. Field engineers can unbolt or unlatch the entire mechanical terminal body from the associated I\/O module faceplate during servicing while keeping the field-side wiring undisturbed.\u003c\/p\u003e\n\u003cp\u003eQ: What are the primary consequences of the ATI3S-001 variant lacking an integrated surge absorber?\u003c\/p\u003e\n\u003cp\u003eA: Because this model contains no internal surge suppression, the hardware relies on external lightning barriers or intermediate marshaling protection strips to clamp high-voltage lightning or inductive switching spikes before they hit the terminal traces.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Strip Length Constraints:\u003c\/strong\u003e Remove the outer insulation jacket of the sensor wire to the exact depth indicated by the mechanical housing guide. Press the integrated actuator clip down, position the bare copper conductor directly into the clamp opening, and release the clip to lock the wire into position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Wire Isolation Rules:\u003c\/strong\u003e Terminate all analog instrument drain shields at the master grounding bar within the marshaling enclosure. Do not ground both ends of the instrument cable to avoid forming localized ground loop currents that distort the analog readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN Rail Mounting Alignment:\u003c\/strong\u003e Snug the base mechanism onto the carrier mounting rail until the retention springs engage. Fasten end anchors on both sides of the terminal group to block lateral shifting or wobbling when the unit is exposed to low-frequency industrial plant vibrations.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43504087597146,"sku":"ATI3S-001","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/178._2eae00f6-0c25-43ef-8cec-64d5a8ba8e75.jpg?v=1781581102","url":"https:\/\/www.spareoil.com\/products\/ati3s-001-yokogawa-centum-vp-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}