{"product_id":"bently-nevada-330102-40-62-05-02-05-3300-xl-series-proximity-probe","title":"Bently Nevada 330102-40-62-05-02-05 3300 XL Series Proximity Probe","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330102-40-62-05-02-05\u003c\/strong\u003e serves as the primary \u003cstrong\u003e330102\u003c\/strong\u003e Proximity Probe utilized to execute vibration and displacement monitoring across 3300 XL Proximity Transducer System platforms. Configured with a metric M10 x 1 interface and a specialized staggered housing, this inductive hardware component measures the physical clearance relative to a rotating target shaft and outputs a proportional high-frequency electrical signal to the system monitoring rack without direct physical contact.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330102\u003c\/strong\u003e: Core model indicator for the 3300 XL 8 mm proximity probe assembly with integrated armor and standard configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-40\u003c\/strong\u003e: Unthreaded length option, designating 40 mm of smooth, unthreaded barrel shank geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-62\u003c\/strong\u003e: Overall case length option, designating a 62 mm total housing envelope depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-05\u003c\/strong\u003e: Total length option, establishing a 0.5-meter (1.6 ft) integrated connection path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-02\u003c\/strong\u003e: Miniature coaxial ClickLoc connector paired with a standard armored electrical cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-05\u003c\/strong\u003e: Agency approval option, certifying compliance with global CSA, ATEX, and IECEx standards for safe operation within Ex ia and Ex nA hazardous zones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330102-40-62-05-02-05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 0.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8 mm probe tip diameter, M10 x 1 metric thread, 62 mm total case length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive sensor driven via external Proximitor loop infrastructure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e2.0 mm (80 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene Sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 Stainless Steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure Limit\u003c\/td\u003e\n\u003ctd\u003eLiquid-tight boundary up to 50 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eClickLoc miniature coaxial connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring \u0026amp; TSI Technical Attributes\u003c\/h3\u003e\n\u003cp\u003eThe transducer operates on high-frequency RF principles, requiring exact calibration relative to target material physical characteristics to ensure appropriate eddy-current probe scaling. To obtain an accurate static reference inside the 2.0 mm linear tracking window, field technicians must perform an on-site gap voltage validation protocol, adjusting the physical position until the baseline potential registers -10 VDC at the center of the calibration spectrum. Correct alignment coordinates the sensor with high-velocity rotor dynamics and filters structural anomalies. Furthermore, cross-talk suppression is maintained via continuous inner coaxial shielding, mitigating signal degradation when parallel sensor leads share localized conduit routing paths.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the main installation advantage of the 40 mm unthreaded section option?\u003c\/p\u003e\n\u003cp\u003eA: The 40 mm unthreaded portion provides a smooth shank that allows for deep insertion through sleeve assemblies or brackets without thread engagement or galling until the probe reaches its near-final physical monitoring depth.\u003c\/p\u003e\n\u003cp\u003eQ: Can this 0.5-meter total length probe be linked directly to a standard 3500 rack system monitor?\u003c\/p\u003e\n\u003cp\u003eA: No. The probe requires an impedance-matched 3300 XL extension cable to extend the total loop length to either 5.0 or 9.0 meters, matching the exact electrical calibration profile of the host Proximitor Sensor.\u003c\/p\u003e\n\u003cp\u003eQ: Does the 50 psi pressure limit allow for direct monitoring inside high-pressure fluid-film bearing cavities?\u003c\/p\u003e\n\u003cp\u003eA: The probe tip and internal case are bonded to remain liquid-tight up to 50 psi against static oil pressure. For applications exceeding 50 psi, a specialized high-pressure fluid seal housing must be used.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eVerify that the matching mounting hole is tapped straight to an M10 x 1 metric specification and is thoroughly cleaned of metallic debris or oil.\u003c\/li\u003e\n\u003cli\u003eCarefully guide the 40 mm smooth unthreaded section into the bore by hand, ensuring the probe barrel does not bind against the interior walls of the mounting sleeve.\u003c\/li\u003e\n\u003cli\u003eAdvance the metric threads while monitoring the raw DC loop output at the Proximitor Sensor testing terminals using a digital multimeter until the gap voltage validation confirms the nominal -10 VDC target.\u003c\/li\u003e\n\u003cli\u003eTighten the hex locknut to standard torque values to prevent drift under continuous machinery structural vibration.\u003c\/li\u003e\n\u003cli\u003eJoin the miniature coaxial ClickLoc connection until a physical and tactile \"click\" is felt, then wrap the connector joint in self-fusing insulation tape to isolate the loop from structural grounding paths.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43572455178330,"sku":"330102-40-62-05-02-05","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330101-00-12-10-02-00_eccd7ae9-87a9-4925-ad35-de4949ef6286.png?v=1782789982","url":"https:\/\/www.spareoil.com\/products\/bently-nevada-330102-40-62-05-02-05-3300-xl-series-proximity-probe","provider":"SpareOil Automation","version":"1.0","type":"link"}