{"product_id":"bently-nevada-330180-51-cn-3300-xl-proximitor-sensor","title":"Bently Nevada 330180-51-CN 3300 XL Proximitor Sensor","description":"\u003cp\u003eConfigured for shaft displacement and vibration monitoring in machine protection platforms, the \u003cstrong\u003eBently Nevada 330180-51-CN\u003c\/strong\u003e (\u003cstrong\u003e330180-51-CN\u003c\/strong\u003e Proximitor Sensor) provides direct physical execution of signal conversion from non-contacting proximity probes.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e330180\u003c\/strong\u003e: 3300 XL Proximitor Sensor base model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e51\u003c\/strong\u003e: 5.0 meter (16.4 feet) total system length, DIN mount configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCN\u003c\/strong\u003e: Country-specific agency approval option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330180-51-CN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.7 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard 3300 XL DIN mount housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +100 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e3300 XL loop-powered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Compatibility\u003c\/td\u003e\n\u003ctd\u003e3300 series 5 mm, 3300 8 mm, or 3300 XL 8 mm probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling and Rotor Dynamics\u003c\/h3\u003e\n\u003cp\u003eThe 330180-51-CN sensor utilizes high-frequency oscillation to measure the gap between the probe tip and a conductive target. To ensure accurate rotor dynamics analysis, the system must undergo gap voltage validation during commissioning; a nominal -10 VDC target should be achieved when the probe is set at the electrical center of its linear range. Precise cross-talk suppression is required in multi-channel installations; ensure that individual probes are spaced according to established minimum clearances to prevent oscillator signal interference between adjacent measurement points.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the -51-CN model support hot-swapping under power?\u003c\/p\u003e\n\u003cp\u003eA: While the electronic components are designed for industrial use, disconnecting the sensor while the monitor is active will result in an open-circuit fault. The monitoring system must be placed in a \"Bypass\" or \"Inhibit\" state before physical disconnection to prevent nuisance alarms or trip events.\u003c\/p\u003e\n\u003cp\u003eQ: Can the 5.0 meter system length be altered in the field?\u003c\/p\u003e\n\u003cp\u003eA: No. The system length is factory-calibrated to match the capacitance of the specific coaxial cable assembly. Cutting or extending this cable will induce phase and amplitude shifts in the oscillator signal, rendering the displacement measurement inaccurate.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eMount the Proximitor sensor on a conductive DIN rail to facilitate a low-impedance ground path for the A308 aluminum housing.\u003c\/li\u003e\n\u003cli\u003eEnsure the coaxial cable is routed away from AC power lines and variable frequency drive outputs to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eTighten all coaxial connectors using a torque wrench or by hand plus one-quarter turn to prevent dielectric deformation and maintain constant impedance.\u003c\/li\u003e\n\u003cli\u003eVerify the integrity of the coaxial shield connection at the rack end to ensure effective noise immunity.\u003c\/li\u003e\n\u003cli\u003eBefore final operation, perform a static gap check using a feeler gauge to confirm the sensor output voltage corresponds to the physical gap distance.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43551770312794,"sku":"330180-51-CN","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330180-90-001_9dc3ee3f-e254-45ec-a35b-a1dd0d128728.png?v=1782357264","url":"https:\/\/www.spareoil.com\/products\/bently-nevada-330180-51-cn-3300-xl-proximitor-sensor","provider":"SpareOil Automation","version":"1.0","type":"link"}