{"product_id":"bently-nevada-330905-06-14-10-02-00-3300-xl-nsv-proximity-probes","title":"Bently Nevada 330905-06-14-10-02-00 3300 XL NSv Proximity Probes","description":"\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330905-06-14-10-02-00\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e330905\u003c\/strong\u003e Proximity Sensors, operates as a dedicated hardware component for non-contact shaft displacement and dynamic vibration measurement within 3300 XL NSv machinery monitoring platforms. Built for installation in restricted counterbores and small shaft geometries, this probe incorporates an unarmored M10 x 1 threaded stainless steel case with a 60 mm unthreaded section, 140 mm overall case length, and a 1.0 m (39 in) FEP coaxial cable terminated with a ClickLoc connector.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eOption Code\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eParameter Designation\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSelected Configuration\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330905\u003c\/td\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003e3300 XL NSv Probe, M10 x 1 thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-06\u003c\/td\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-14\u003c\/td\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e140 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-10\u003c\/td\u003e\n\u003ctd\u003eTotal Length Option\u003c\/td\u003e\n\u003ctd\u003e1.0 m (39 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-02\u003c\/td\u003e\n\u003ctd\u003eConnector \u0026amp; Cable Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e-00\u003c\/td\u003e\n\u003ctd\u003eAgency Approval Option\u003c\/td\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e330905-06-14-10-02-00\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eBently Nevada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eM10 x 1 thread profile (140 mm overall case length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-34 deg C to +177 deg C (-30 deg F to +351 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive transducer (Powered via Proximitor Sensor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-51 deg C to +177 deg C (-60 deg F to +351 deg F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Specification\u003c\/td\u003e\n\u003ctd\u003e75 Ohm coaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eNot required (Option 00)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eMechanical Monitoring \u0026amp; TSI Performance\u003c\/h3\u003e\n\u003cp\u003eThe 330905-06-14-10-02-00 transducer uses calibrated eddy-current probe scaling to measure real-time rotor dynamics on tight shaft targets and narrow side-clearance installations. The RF signal generated by the matching 3300 XL NSv Proximitor Sensor produces a linear output voltage relative to the distance between the PPS probe tip and the conductive shaft surface. Performing gap voltage validation to achieve a target setting of -10 VDC positions the transducer at the midpoint of its calibrated linear range, providing cross-talk suppression and signal integrity across closely spaced monitoring channels.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What target gap voltage reading indicates correct physical setup for the 330905 probe?\u003c\/p\u003e\n\u003cp\u003eA: Mechanical thread insertion depth must be set until the output voltage measured at the connected 3300 XL NSv Proximitor Sensor reads -10 VDC, centering the probe in its linear operating span.\u003c\/p\u003e\n\u003cp\u003eQ: Can the 1.0 m probe cable be routed directly to monitor terminal strips without an extension cable?\u003c\/p\u003e\n\u003cp\u003eA: No. The integrated 1.0 m (39 in) FEP coaxial cable must couple via its miniature ClickLoc connector to a matching 3300 NSv extension cable to complete the 5.0 m or 7.0 m tuned system loop length.\u003c\/p\u003e\n\u003cp\u003eQ: What function does the 60 mm unthreaded length (-06 option) serve during installation?\u003c\/p\u003e\n\u003cp\u003eA: The 60 mm unthreaded neck allows the probe body to pass through unthreaded mounting sleeve clearances or thick housing walls without thread galling before engaging the interior M10 x 1 mounting threads.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eThread the M10 x 1 stainless steel casing into the mounting port by hand to avoid cross-threading prior to applying final torque.\u003c\/li\u003e\n\u003cli\u003eEnsure a minimum engagement of 5 full threads within the tapped port to maintain physical stability under operational machine vibration.\u003c\/li\u003e\n\u003cli\u003eRoute the unarmored FEP coaxial cable through protective conduit, observing minimum bend radii and keeping distance from high-voltage AC lines.\u003c\/li\u003e\n\u003cli\u003eClean the miniature coaxial ClickLoc connector mating contacts to remove oil or debris before twisting and latching the connector lock.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Bently Nevada","offers":[{"title":"Default Title","offer_id":43748437950554,"sku":"330905-06-14-10-02-00","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/330877-080-36-00_27504d69-7c0a-49ec-8a6d-400ec32371fd.png?v=1785230513","url":"https:\/\/www.spareoil.com\/products\/bently-nevada-330905-06-14-10-02-00-3300-xl-nsv-proximity-probes","provider":"SpareOil Automation","version":"1.0","type":"link"}