{"product_id":"foxboro-p0914rn-control-interface-module-new-original-stock","title":"Foxboro P0914RN Control Interface Module | New \u0026 Original Stock","description":"\u003ch2\u003eFoxboro P0914RN BDSI07 I\/A Series Control Interface Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFoxboro P0914RN-BDSI07\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eP0914RN\u003c\/strong\u003e Signal interface \/ I\/O module, operates as a dedicated hardware component for signal conditioning, isolation, and communication within Foxboro I\/A Series distributed control system networks. The hardware establishes direct physical and electrical execution between field instruments and process controllers. By processing field signals through internal isolation barriers, the unit prevents ground loops from compromising the integrity of the centralized control architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eP0914RN-BDSI07\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFoxboro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e14 x 5 x 11 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLess than or equal to 8 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eSignal interface \/ I\/O module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eChannel-to-channel and channel-to-ground galvanic isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eIntegrated interface for I\/A Series backplane bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003eUp to 95% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eCE, IEC 61131-2, ATEX Zone 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eChannel-to-Channel Isolation and HART Loop Protocol Interaction\u003c\/h3\u003e\n\u003cp\u003eThe module interface utilizes separate analog front-end circuits to deliver channel-to-channel isolation across all field inputs. This galvanic boundary blocks electrical noise and high-voltage transients from migrating to the active backplane bus. The physical circuit architecture maintains linear electrical impedance constraints, enabling compatibility with the 4-20 mA HART loop protocol. Digital modulation frequencies pass through the conditioning stages without signal attenuation, allowing the host controllers to capture secondary variables from smart field instruments while maintaining uninterrupted execution of the primary analog control loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the module react to a singular 24 VDC power rail drop in a redundant configuration?\u003c\/p\u003e\n\u003cp\u003eA: The module internal power routing includes dual diode-ORed circuits. If one 24 VDC power feed drops, the redundant rail takes over the full current load instantaneously, maintaining data bus communication without interrupting signal conditioning loops or generating a system fault.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module be hot-swapped while the I\/A Series rack is energized?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the physical connector pins are tiered to ensure ground connections engage first during insertion and break last during removal. This architecture allows live hot-swap replacement without corrupting data transmission on the active backplane bus.\u003c\/p\u003e\n\u003cp\u003eQ: What are the specific grounding parameters required to prevent signal drift on the analog loops?\u003c\/p\u003e\n\u003cp\u003eA: The module relies on the backplane grounding strip. The instrument enclosure must make direct metal-to-metal contact with a clean, low-impedance master instrument ground bus line (\u0026lt; 1 Ohm resistance) to prevent floating reference voltages from causing measurement drift.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Grounding and Drain Wire Termination\u003c\/strong\u003e: Terminate field instrument cable shields explicitly at the marshalling panel ground bar. Do not ground the shield at both ends to eliminate the risk of circulating ground currents, which corrupt the channel-to-channel isolation parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBackplane Interface Alignment\u003c\/strong\u003e: Align the module precisely with the chassis tracks of the I\/A Series universal enclosure before pushing the card into the backplane connector. Secure the mechanical retention fasteners to prevent vibration from loosening the electrical contacts over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management and Airflow Clearances\u003c\/strong\u003e: Ensure that the open ventilation slots on the module housing remain unblocked. Maintain a minimum 50 mm clear wiring space below the module assembly to allow unrestricted convective air circulation within environments approaching the +60 deg C operational threshold.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Foxboro","offers":[{"title":"Default Title","offer_id":43461742166106,"sku":"P0914RN BDSI07","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/413._233ff9c1-826e-4405-aa14-e462b641ca0d.jpg?v=1780880558","url":"https:\/\/www.spareoil.com\/products\/foxboro-p0914rn-control-interface-module-new-original-stock","provider":"SpareOil Automation","version":"1.0","type":"link"}