{"product_id":"foxboro-p0926gj-i-a-series-dcs-cable-termination-assemblies","title":"Foxboro P0926GJ I\/A Series DCS Cable Termination Assemblies","description":"\u003ch2\u003eFoxboro P0926GJ I\/A Series Termination Assembly Cable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eFoxboro P0926GJ\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eP0926GJ\u003c\/strong\u003e Termination Assembly Cable, operates as a dedicated hardware component for wiring termination and signal routing within Foxboro I\/A Series DCS platforms. It provides direct physical connectivity to route field signals—including 4-20 mA, RTD, thermocouple, and discrete I\/O—between field devices and corresponding Fieldbus Modules (FBMs). The assembly supports up to 24 channels while providing galvanic isolation between field-side wiring and internal system logic.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eP0926GJ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFoxboro (Schneider Electric)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.43 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e10.00 x 8.00 x 3.00 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive field termination assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type \/ Length\u003c\/td\u003e\n\u003ctd\u003eCable Type 5 \/ 1.00 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels Supported\u003c\/td\u003e\n\u003ctd\u003eUp to 24 channels (FBM dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Types\u003c\/td\u003e\n\u003ctd\u003e4-20 mA, RTD, Thermocouple, Discrete Signals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eGalvanic isolation between field wiring and logic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eRemovable terminal blocks (spring clamp or screw type)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Capacity\u003c\/td\u003e\n\u003ctd\u003e18 to 22 AWG copper conductors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure Rating\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eStandard 35 mm DIN rail or panel baseplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol \u0026amp; Galvanic Isolation\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eFoxboro P0926GJ\u003c\/strong\u003e acts as an isolated signal interface designed to transport 4-20 mA analog loops, RTD, thermocouple, and discrete field signals via a 1.00 m Type 5 cable assembly. Built-in galvanic isolation isolates field instrument wiring from sensitive backplane electronics, suppressing common-mode electrical noise and mitigating ground loop interference across process control environments. This physical separation maintains signal integrity for high-density I\/O configurations connected to host FBM modules.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the P0926GJ termination assembly require active firmware updates or system calibration?\u003c\/p\u003e\n\u003cp\u003eA: No, the P0926GJ is a passive wiring interface and signal routing assembly that requires no internal firmware or field calibration. Channel assignments and signal processing parameters are defined within host EcoStruxure Foxboro DCS software tools upon pairing with the targeted FBM.\u003c\/p\u003e\n\u003cp\u003eQ: How are field wiring harnesses serviced during hardware maintenance?\u003c\/p\u003e\n\u003cp\u003eA: The unit features removable terminal block connectors (spring clamp or screw type) compatible with 18 to 22 AWG copper wire. This allows technicians to replace the hardware assembly without detaching individual field conductors.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eMount the termination assembly chassis on a 35 mm DIN rail or attach it directly to a panel baseplate inside an IP54-rated cabinet. Provide a minimum vertical clearance of 50 mm above and below the housing to maintain natural convection cooling and allow adequate space for field wiring ducts.\u003c\/p\u003e\n\u003cp\u003eRoute low-voltage field instrument cables away from high-voltage AC power distribution lines to avoid inductive noise coupling. Strip 18 to 22 AWG copper conductors to standard specifications and secure them into the removable terminal blocks using specified screw torque ratings. Ground all cable shields at a single point on the main cabinet ground bus to preserve galvanic isolation performance. Connect the integral 1.00 m Type 5 cable securely to the assigned FBM baseplate interface port.\u003c\/p\u003e","brand":"Foxboro","offers":[{"title":"Default Title","offer_id":43931821342810,"sku":"P0926GJ","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/470._0eba14f5-32e6-4e5f-9923-873f941f967f.jpg?v=1787909368","url":"https:\/\/www.spareoil.com\/products\/foxboro-p0926gj-i-a-series-dcs-cable-termination-assemblies","provider":"SpareOil Automation","version":"1.0","type":"link"}