{"product_id":"ge-fanuc-ds200sdccg1ahd-drive-control-card","title":"GE Fanuc DS200SDCCG1AHD Drive Control Card","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc DS200SDCCG1AHD\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200SDCC\u003c\/strong\u003e Drive Control Card, operates as a dedicated hardware component for primary drive processing and motor control execution within Mark V Speedtronic platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200SDCCG1AHD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePower Supplied via Backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOnboard Processors\u003c\/td\u003e\n\u003ctd\u003e3 Microprocessors (1 Drive Control, 2 Motor Control including Math Accelerator)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOnboard Memory\u003c\/td\u003e\n\u003ctd\u003eDual-Port RAM for Concurrent Processor Access\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating Style\u003c\/td\u003e\n\u003ctd\u003eNormal Protective PCB Coating\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManual Reference\u003c\/td\u003e\n\u003ctd\u003eGEI-100029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRevisions\u003c\/td\u003e\n\u003ctd\u003eGroup 1, Functional Rev A\/H, Artwork Rev D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication \u0026amp; Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE Fanuc DS200SDCCG1AHD\u003c\/strong\u003e serves as the central processing node on the Mark V control backplane. High backplane bus communication velocity is sustained by offloading tasks across its three microprocessors, where dual-port RAM allows simultaneous reads\/writes without CPU wait-states. Real-time motor parameters and drive execution routines run deterministically across internal busses. Full firmware flash compatibility is maintained during parameters download or upload via an optional LAN communications card attached to the base assembly.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the triple-microprocessor architecture process drive execution?\u003c\/p\u003e\n\u003cp\u003eA: One microprocessor handles overall drive control tasks, while the remaining two dedicate processing capacity to motor control loops, with one specifically assigned to high-speed math-intensive calculations.\u003c\/p\u003e\n\u003cp\u003eQ: How is configuration data transferred to or from the DS200SDCCG1AHD card?\u003c\/p\u003e\n\u003cp\u003eA: A laptop connects via a serial cable to an optional LAN communications card mounted on the SDCC card, allowing software configuration files to be edited, uploaded, or cloned across identical drive controllers.\u003c\/p\u003e\n\u003cp\u003eQ: What precautions should be taken when disconnecting the serial programming cable?\u003c\/p\u003e\n\u003cp\u003eA: Drive input power must be completely turned off prior to cable removal to prevent accidental contact with high-voltage circuits inside the drive enclosure.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Isolation:\u003c\/strong\u003e Fully de-energize the drive enclosure and execute lockout\/tagout procedures before inserting or removing the card.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Grounding:\u003c\/strong\u003e Technicians must wear an ESD wrist strap grounded to the drive chassis during installation to prevent electrostatic damage to the microprocessors and RAM ICs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCard Alignment:\u003c\/strong\u003e Align the card along the rack guides and press firmly to seat backplane edge connectors without applying uneven pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial Interface Configuration:\u003c\/strong\u003e When attaching auxiliary LAN expansion cards, ensure header pins line up correctly and cable connectors are fully latched before applying power.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":43895520624730,"sku":"DS200SDCCG1AHD","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/DS200SDCCG1AGD_631afc60-f5b0-4286-850b-0a7388d7c1b4.png?v=1787539074","url":"https:\/\/www.spareoil.com\/products\/ge-fanuc-ds200sdccg1ahd-drive-control-card","provider":"SpareOil Automation","version":"1.0","type":"link"}