{"product_id":"general-electric-ds200tccag1b-mark-v-common-analog-i-o-board","title":"General Electric DS200TCCAG1B Mark V Common Analog I\/O Board","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200TCCAG1B\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200TCCA\u003c\/strong\u003e Common Analog I\/O Board, operates as a dedicated hardware component for conditioning and processing multi-channel analog measurement signals within Mark V Speedtronic R5 core control enclosures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDS200TCCAG1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard PCB weight (~0.75 kg \/ 1.65 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard Mark V module PCB profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBus input powered via internal control rack backplane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMark V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunctional Acronym\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTCCA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFunctional Revision\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRevision B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported Signal Types\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4-20 mA inputs\/outputs, RTDs, thermocouples, shaft voltage, shaft current\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTerminal Board Interfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCTBA, TBQA, TBCA via JBB and JAA connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eData Bus Connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3PL connector (writes signal values to STCA board \/ I\/O Engine)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHardware Jumpers\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eJ1 (RS232 port enable\/disable), JP2 (oscillator disable), JP3 (factory test)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication \u0026amp; I\/O Density Scaling\u003c\/h3\u003e\n\u003cp\u003eThe DS200TCCAG1B integrates high-density multi-channel analog signal acquisition with backplane bus communication across the Speedtronic Mark V control bus. Analog inputs received from field transducers through terminal boards CTBA, TBQA, and TBCA undergo active conditioning and burden-resistor voltage drop measurement on the board. Signal data is subsequently formatted and pushed through the 3PL connector interface directly to the STCA board and system I\/O Engine. Maintaining channel-to-channel signal integrity and firmware flash compatibility ensures synchronized, low-latency execution across deterministic processor cycles in the R5 core.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the function of hardware jumper J1 on the DS200TCCAG1B board?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: Jumper J1 configures the operational state of the onboard serial port, allowing engineers to manually enable or disable RS232 communication.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How are 4-20 mA current signals read by the TCCA board from external field devices?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: Current signals enter through the JBB connector from the CTBA terminal board, where the TCCA board measures the precise voltage drop developed across an integrated burden resistor before routing the value to the I\/O Engine via the 3PL connector.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Which hardware jumpers should remain in their default operational states during standard field deployment?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA: Jumpers JP2 (oscillator disable) and JP3 (factory test) are intended strictly for diagnostic and factory testing routines and must be configured according to GE documentation for normal operation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Isolation:\u003c\/strong\u003e Fully de-energize the Mark V R5 core power supply before inserting or removing the DS200TCCAG1B module from the rack assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD Protection:\u003c\/strong\u003e Wear a grounded wrist strap connected to the chassis frame ground point during all handling, jumper setting, or installation procedures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardware Jumper Audit:\u003c\/strong\u003e Inspect jumpers J1, JP2, and JP3 prior to board installation to ensure their positions match the required field operational profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRibbon Cable Seating:\u003c\/strong\u003e Verify that the 3PL, JBB, and JAA ribbon cable connectors are fully seated and latched to prevent intermittent signal transmission to the STCA board and CTBA terminal assemblies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware Configuration:\u003c\/strong\u003e Use the designated HMI software configuration editor to configure parameter scaling for all thermocouple, RTD, shaft voltage\/current, and 4-20 mA input\/output channels mapped to this card.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"General Electric","offers":[{"title":"Default Title","offer_id":43904497516634,"sku":"DS200TCCAG1B","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/DS200TCCAG1BAA.png?v=1787650559","url":"https:\/\/www.spareoil.com\/products\/general-electric-ds200tccag1b-mark-v-common-analog-i-o-board","provider":"SpareOil Automation","version":"1.0","type":"link"}