{"product_id":"ic200mdl740-ge-versamax-discrete-output-module","title":"IC200MDL740 | GE | VersaMax Discrete Output Module","description":"\u003cp\u003eThe \u003cstrong\u003eGE IC200MDL740\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIC200MDL740\u003c\/strong\u003e Discrete Output Module, operates as a dedicated hardware component for 12\/24 VDC discrete load switching within GE VersaMax I\/O platforms. Incorporating 16 sourcing-type (positive logic) output channels arranged in a single isolated group, the unit routes power from an external 10.2 to 30 VDC supply to field actuators, relays, and indicators. Execution timing is defined by a maximum ON response time of 0.2 ms and a maximum OFF response time of 1.0 ms across all output channels, while 18 status LEDs provide continuous point-level and module power status verification.\u003c\/p\u003e\n\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC200MDL730 \/ IC200MDL740\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.26 kg (0.56 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard VersaMax Single-Slot Carrier Profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e45 mA @ 5 VDC (Backplane current draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule ID\u003c\/td\u003e\n\u003ctd\u003eFFFF8080\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Points\u003c\/td\u003e\n\u003ctd\u003e16 Discrete Outputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Groups\u003c\/td\u003e\n\u003ctd\u003e1 Group (16 channels per group)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Type\u003c\/td\u003e\n\u003ctd\u003eSourcing \/ Positive Logic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Voltage\u003c\/td\u003e\n\u003ctd\u003e12\/24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage Range\u003c\/td\u003e\n\u003ctd\u003e10.2 to 30 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003eON: 0.2 ms max; OFF: 1.0 ms max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal Protection\u003c\/td\u003e\n\u003ctd\u003eNo internal fuses (requires external circuit protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eNone (Group-to-Group or Point-to-Point)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Power Supply\u003c\/td\u003e\n\u003ctd\u003e10.2 to 30 VDC (12\/24 VDC nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Display\u003c\/td\u003e\n\u003ctd\u003e16 point LEDs, 1 OK LED, 1 FLD PWR LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Network Integration \u0026amp; Field Scaling\u003c\/h3\u003e\n\u003cp\u003eInterfacing directly with VersaMax controller backplanes, the IC200MDL740 maintains steady backplane bus communication velocity while drawing 45 mA from the logic power rail. Configurable firmware filter parameters allow deterministic cycle synchronization across Profinet and EtherNet\/IP distributed I\/O network drops. Scaling of high-density output channels is managed through snap-in carrier bases, where native hardware ID identification flags enforce firmware flash compatibility during hot-swap exchanges on live system backplanes.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the IC200MDL740 contain internal fuses to protect outputs against short circuits?\u003c\/p\u003e\n\u003cp\u003eA: No. The IC200MDL740 does not feature internal fusing. External fusing or power-limiting devices must be wired inline with output channels to protect field wiring and internal output transistors from overload conditions.\u003c\/p\u003e\n\n\u003cp\u003eQ: How should inductive loads be wired to the IC200MDL740 outputs?\u003c\/p\u003e\n\u003cp\u003eA: Inductive loads (such as solenoid coils or contactors) require external suppression circuits, such as flyback diodes or RC networks, connected directly across the load terminals or output points to absorb inductive energy spikes upon switching OFF.\u003c\/p\u003e\n\n\u003cp\u003eQ: Is hot insertion permitted for this module during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The module supports hot insertion onto its carrier base without removing field wiring, provided physical alignment is maintained to prevent edge-connector pin damage.\u003c\/p\u003e\n\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003ePower Isolation\u003c\/strong\u003e: Turn off main supply power before mounting or servicing the I\/O base unit to eliminate electrical shock hazards and unwanted actuator triggering.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eCarrier Base Mounting\u003c\/strong\u003e: Align the module housing with the VersaMax carrier slot and press firmly until both side clips engage, ensuring full mechanical engagement with the backplane bus connector.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eExternal Load Power Connections\u003c\/strong\u003e: Connect the external 10.2 to 30 VDC power supply to the designated DC+ and DC- bus terminals on the carrier block. Use a shorting bar rated for at least 2 A when additional bused terminals are required on Terminal B.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eInductive Suppression Setup\u003c\/strong\u003e: Install external transient suppression diodes across all DC inductive load devices to suppress voltage spikes and prevent output transistor degradation.\u003c\/p\u003e\n\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Line Separation\u003c\/strong\u003e: Run low-voltage DC output wiring in separate wiring channels from high-voltage AC lines and variable frequency drive cables to mitigate induced electromagnetic noise.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":43791541633114,"sku":"IC200MDL740","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/IC200MDL740.jpg?v=1785983190","url":"https:\/\/www.spareoil.com\/products\/ic200mdl740-ge-versamax-discrete-output-module","provider":"SpareOil Automation","version":"1.0","type":"link"}