{"product_id":"is200aepah1bhc-ge-multiport-interface-pc-board","title":"IS200AEPAH1BHC GE Multiport Interface PC Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE IS200AEPAH1BHC\u003c\/strong\u003e serves as the primary \u003cstrong\u003eIS200AEPA\u003c\/strong\u003e Multiport Interface PC Board utilized to execute multi-channel signal acquisition and distributed network communications across turbine control platforms. Operating on a 5 VDC supply, it interfaces 16 analog input and 8 analog output channels while bridging CAN Bus field loops to 10\/100\/1000BASE-T Ethernet backplane segments at a 200 kHz sampling rate.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200AEPAH1BHC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric (GE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e2 lbs (0.9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e250 mm x 150 mm x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e4 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e5 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Channels\u003c\/td\u003e\n\u003ctd\u003e16 differential or single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e8 single-ended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSampling Rate\u003c\/td\u003e\n\u003ctd\u003e200 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolution\u003c\/td\u003e\n\u003ctd\u003e12-bit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Interface\u003c\/td\u003e\n\u003ctd\u003eCAN Bus, 10\/100\/1000BASE-T Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Transfer Rate\u003c\/td\u003e\n\u003ctd\u003e1 Mbps (CAN Bus)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMTBF\u003c\/td\u003e\n\u003ctd\u003e250,000 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility and Deterministic Ethernet Networks\u003c\/h3\u003e\n\u003cp\u003eTo support synchronized control loop execution within GE turbine architectures, the board utilizes deterministic Ethernet protocols over its 10\/100\/1000BASE-T ports. This ensures rigid data frame delivery and exact timing for 200 kHz analog I\/O sampling cycles. Additionally, onboard non-volatile memory supports direct firmware flash compatibility, allowing system engineers to deploy network parameter updates and communication protocol revisions across the chassis without physically extracting the board from the backplane.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the maximum backplane power load of the module during full I\/O saturation?\u003c\/p\u003e\n\u003cp\u003eA: The board draws a maximum power consumption of 4 W from the 5 VDC backplane supply when all 16 input channels and 8 output channels are continuously processing active signals.\u003c\/p\u003e\n\u003cp\u003eQ: How is data routed between the different physical communication interfaces on the board?\u003c\/p\u003e\n\u003cp\u003eA: Field-level distributed control data is processed through the CAN Bus interface operating at a 1 Mbps transfer rate, while upper-level supervisory and deterministic network traffic is handled simultaneously via the 10\/100\/1000BASE-T Ethernet connections.\u003c\/p\u003e\n\u003cp\u003eQ: Are the analog input channels individually isolated from each other?\u003c\/p\u003e\n\u003cp\u003eA: The hardware architecture provides 16 channels that can be configured as differential or single-ended inputs. If strict channel-to-channel galvanic isolation is required for high-voltage transient environments, external intrinsic safety barriers or isolation amplifiers must be installed in the field wiring loop.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eIsolate the 5 VDC backplane power supply and tag out the primary control rack prior to inserting or removing the printed circuit board.\u003c\/li\u003e\n\u003cli\u003eConnect a grounded electrostatic discharge (ESD) wrist strap to bare skin before handling the module to prevent static degradation of the 12-bit conversion ICs.\u003c\/li\u003e\n\u003cli\u003eSeat the board fully into the designated chassis guide rails, applying even pressure to the top and bottom edges until the rear header pins engage completely with the backplane receptacles.\u003c\/li\u003e\n\u003cli\u003eRoute the CAN Bus network wiring separate from high-voltage AC cables, ensuring the shield drain wire is grounded at one single point to prevent ground loops.\u003c\/li\u003e\n\u003cli\u003eTerminate the 10\/100\/1000BASE-T Ethernet connections using Category 5e or higher shielded twisted pair (STP) cabling for industrial environments.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE Fanuc","offers":[{"title":"Default Title","offer_id":43846514049114,"sku":"IS200AEPAH1BHC","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/IS200AEPAH1BHC.png?v=1786696620","url":"https:\/\/www.spareoil.com\/products\/is200aepah1bhc-ge-multiport-interface-pc-board","provider":"SpareOil Automation","version":"1.0","type":"link"}