{"product_id":"p0926kp-foxboro-i-a-series-datasheet-technical-manual","title":"P0926KP Foxboro I\/A Series Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eFoxboro P0926KP Termination Assembly\u003c\/h2\u003e\n\u003cp\u003eConfigured for field device signal termination in Foxboro I\/A Series platforms, the \u003cstrong\u003eFoxboro P0926KP\u003c\/strong\u003e (\u003cstrong\u003eP0926KP\u003c\/strong\u003e Termination Assembly) provides direct physical\/electrical execution. It interfaces industrial field instruments directly to companion Fieldbus Modules (FBMs) via integrated wire distribution routing lanes, managing point-to-point interconnecting paths across the central system backplane interface.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eP0926KP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFoxboro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e45 x 102 x 104 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (determined by host FBM module load)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eFoxboro I\/A Series FBM modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eProvides wiring interface between FBMs and field devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Terminals\u003c\/td\u003e\n\u003ctd\u003e16-32 (dependent on FBM type)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Types Supported\u003c\/td\u003e\n\u003ctd\u003eAnalog input\/output, digital input\/output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiring Method\u003c\/td\u003e\n\u003ctd\u003eScrew-clamp or spring-clamp terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eChannel-to-channel and channel-to-ground (via FBM design)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity\u003c\/td\u003e\n\u003ctd\u003eUp to 95% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, UL, CSA, IEC 61131-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProcess Control \u0026amp; DCS Terminal Properties\u003c\/h3\u003e\n\u003cp\u003eThe assembly architecture accommodates multi-channel signal routing supporting standard 4-20 mA HART loop protocol parameters alongside high-density discrete point assignments. The electrical pathing maps passive or active field loop signals to distinct physical connections without introducing parallel loop path drifting. Structural isolation parameters match the specific companion FBM hardware specifications, utilizing isolated copper paths to contain transient high-frequency common-mode noise and prevent localized electrical faults from crossing over adjacent I\/O boundaries.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does the assembly maintain continuous loop power if the active FBM module is extracted?\u003c\/strong\u003e A: Yes, field wiring terminates directly at this assembly, which remains permanently attached to the cabinet rail. This physical separation supports hot-swappable installation routines, allowing host FBM cards to be disconnected or replaced without breaking the physical field circuits or dropping loop currents.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: How are different signal types and ranges segregated across the terminals?\u003c\/strong\u003e A: The termination points accept standard current loops or discrete voltage ranges. However, mixing disparate classifications across a single assembly is governed strictly by the channel capability of the connected FBM module card; the passive terminal block acts solely as a physical routing interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is the maximum torque and strip threshold specification for the wire terminal clamps?\u003c\/strong\u003e A: Standard industrial guidelines require field conductors to be stripped back approximately 8 mm. Screw-clamp variants must be torqued to baseline panel standards to guarantee a constant gas-tight connection under continuous low-frequency structural vibration.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN Rail Alignment:\u003c\/strong\u003e Mount the assembly frame directly to a clean, conductive standard symmetric DIN rail or specialized carrier baseplate. Ensure the rear grounding clip mechanisms snap securely into place to establish a direct low-impedance connection path to the cabinet chassis ground grid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Wire Management:\u003c\/strong\u003e Terminate all incoming 4-20 mA or low-voltage discrete signal cable shields to a centralized, dedicated instrumentation earth bus bar. Do not terminate individual shields at both ends of the loop to protect the circuit against induced electromagnetic ground loop propagation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparation Matrix Constraints:\u003c\/strong\u003e Route all field interface wires through designated layout paths inside the panel. Maintain a permanent physical separation of at least 30 cm between these low-voltage analog\/digital signal paths and any high-voltage AC distribution power conduits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Torque Verification:\u003c\/strong\u003e Inspect and verify the tightness of all screw-clamp interfaces post-installation. Loose connection elements introduce localized circuit resistance, which degrades the overall measurement accuracy indices of precision analog loops.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Foxboro","offers":[{"title":"Default Title","offer_id":43463359758426,"sku":"P0926KP","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/429._998a64a1-d7da-4e36-9c9e-a43153d74fbc.jpg?v=1780890797","url":"https:\/\/www.spareoil.com\/products\/p0926kp-foxboro-i-a-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}