{"product_id":"sps5713-honeywell-transistor-device-datasheet-technical-manual","title":"SPS5713 Honeywell Transistor Device Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eHoneywell SPS5713 51199930-100 Main Power Rack Transistor Device\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eHoneywell SPS5713\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e51199930-100\u003c\/strong\u003e Main Power Rack Transistor Device, operates as a dedicated hardware component for high-frequency switching and power modulation within Honeywell main power rack networks. The module executes precise energy regulation by switching DC bus potentials ranging from 24 V DC to 100 V DC via built-in solid-state transistor matrices. Operating at switching frequencies up to 50 kHz, the hardware shapes active power distribution profiles under direct digital control while maintaining serial tracking link feedback.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSPS5713\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.00 kg (2.20 lbs) net mass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 mm x 100 mm x 100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Rating\u003c\/td\u003e\n\u003ctd\u003e1000 W maximum throughput capacity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage Range\u003c\/td\u003e\n\u003ctd\u003e24 V to 100 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Current Span\u003c\/td\u003e\n\u003ctd\u003e10 A to 20 A continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Frequency Range\u003c\/td\u003e\n\u003ctd\u003e20 kHz to 50 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Modulation\u003c\/td\u003e\n\u003ctd\u003ePulse Width Modulation (PWM) \/ Pulse Position Modulation (PPM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Interface\u003c\/td\u003e\n\u003ctd\u003e1 x RS-485 port (electrically isolated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLogic Power Consumption\u003c\/td\u003e\n\u003ctd\u003e25 W maximum drawn from internal rack rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling Method\u003c\/td\u003e\n\u003ctd\u003eThermal conductive compound interface to primary heatsink block\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection Class\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Channel-to-Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe Honeywell SPS5713 implements an isolated RS-485 serial communication port to report internal power diagnostics, tracking metrics, and thermal boundary variables without introducing loop noise. The high-speed 50 kHz switching topology is physically separated from low-voltage instrument networks, ensuring that high-frequency harmonics do not contaminate adjacent 4-20 mA HART loop protocol lines.\u003c\/p\u003e\n\u003cp\u003eThe transformer-isolated data structures prevent the development of common-mode voltage spikes across the chassis. This design preserves the performance of down-line analog instrumentation, supporting clean multi-drop frequency-shift keying (FSK) data paths by matching the strict parameters mandated by high channel-to-channel isolation field configurations.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How are high-frequency PWM switching harmonics restricted from causing measurement drift in adjacent analog racks? A: The module relies on internal high-frequency filtering networks and localized chassis shielding barriers. These components restrict radiated electromagnetic emissions and contain switching noise within the 24-100 V DC power bus, keeping high-frequency harmonics from degrading nearby low-level signal loops.\u003c\/p\u003e\n\u003cp\u003eQ: What structural issues arise if the thermal conductive compound interface dries or detaches from the heatsink? A: A degradation of the thermal conductive layer reduces heat transfer efficiency out to the main rack heatsink structure. This leads to rapid heat buildup within the power transistor junctions under heavy 20 A loads, triggering internal thermal shutdowns to prevent hardware failure.\u003c\/p\u003e\n\u003cp\u003eQ: Can the RS-485 interface be utilized to rewrite the base PWM carrier frequency during active, high-current switching cycles? A: No. Modifying base modulation variables or altering control modes between PWM and PPM must be executed under interlocked standby conditions. Changing carrier frequencies during live high-current switching can cause timing conflicts that risk tripping over-current protection circuits.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDe-energize all high-voltage DC feeder lines and isolate the main power rack backplane before inserting or extracting the transistor assembly.\u003c\/li\u003e\n\u003cli\u003eInspect the rear thermal pad interface and apply a uniform layer of specified thermal conductive compound before seating the module against the chassis heatsink.\u003c\/li\u003e\n\u003cli\u003eAlign the module pins with the rack socket contacts, pushing firmly until the hardware blocks are seated, then tighten all mechanical retention screws.\u003c\/li\u003e\n\u003cli\u003eTerminate the serial RS-485 tracking links using shielded twisted-pair conductors, making sure the shield terminates exclusively at the main panel earth ground lug.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum physical spacing profile of 30 cm between the 100 V DC power output cables and any sensitive analog instrumentation or sensor lines.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Honeywell","offers":[{"title":"Default Title","offer_id":42909871571034,"sku":"SPS5713 51199930-100","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/60.jpg?v=1770687359","url":"https:\/\/www.spareoil.com\/products\/sps5713-honeywell-transistor-device-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}