{"product_id":"tei14949-allen-bradley-series-datasheet-technical-manual","title":"TEI14949 Allen-Bradley Series Datasheet \u0026 Technical Manual","description":"\u003ch2\u003eAllen-Bradley TEI14949 Coaxial Male Connector\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eAllen-Bradley TEI14949\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eTEI14949\u003c\/strong\u003e Coaxial Male Connector, operates as a dedicated hardware component for high-frequency signal transmission within instrumentation and RF distribution networks.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eTEI14949\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eAllen-Bradley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA (Trompeter Electronics manufacturer origin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e360 g (0.01 lbs bare component weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eLength 43 mm, Diameter 15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-55 to +155 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive component (Voltage rating: 500 V, Current rating: 3 A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eCoaxial Male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCharacteristic Impedance\u003c\/td\u003e\n\u003ctd\u003e50 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Range\u003c\/td\u003e\n\u003ctd\u003eDC to 18 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface Application\u003c\/td\u003e\n\u003ctd\u003eRF, microwave, and instrumentation networks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompliance\u003c\/td\u003e\n\u003ctd\u003eRoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control \u0026amp; Drive Integration\u003c\/h3\u003e\n\u003cp\u003eThe TEI14949 manages physical high-frequency signal routing independent of standard backplane bus communication velocity constraints found in processing frames. Designed to transmit critical clock or analytical instrumentation data, the component helps establish link integrity when integrating specialized communication modules on Profinet \/ EtherNet\/IP deterministic networks. Maintaining exact mechanical tolerances and surface properties prevents impedance discontinuities that could induce signal attenuation or dropouts during high-bandwidth I\/O density scaling routines.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this hardware module require software configuration or firmware flash compatibility checks?\u003c\/p\u003e\n\u003cp\u003eA: No. The TEI14949 is an entirely passive mechanical coaxial interface component. It contains no microprocessor or internal logic, eliminating the need for firmware parameter definitions or hardware platform synchronization routines.\u003c\/p\u003e\n\u003cp\u003eQ: Can this connector be coupled or decoupled while the instrument carrier is actively powered?\u003c\/p\u003e\n\u003cp\u003eA: No. Connections must not be altered while high-voltage radio-frequency or electrical signals are active on the line. Powering down or isolating the circuit before disconnection prevents arc damage to the internal pin interfaces and limits signal distortion.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface Axial Alignment\u003c\/strong\u003e: Ensure the male center pin and outer locking sleeve line up with the target female receptacle without angular offset. Push smoothly forward along the axial plane to engage the connection without bending the internal conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial Shield Bonding\u003c\/strong\u003e: Secure the cable outer shield termination directly to the connector body clamp. Continuous shielding must be maintained across the connection length to optimize noise suppression and stop high-frequency radiation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Retention Verification\u003c\/strong\u003e: Tighten the threaded or bayonet locking mechanism completely onto the mating bulkhead jack. Secure engagement is necessary to maintain stable contact resistance and resist high-frequency mechanical vibration.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Allen Bradley","offers":[{"title":"Default Title","offer_id":43421398401114,"sku":"TEI14949","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/2._b5ca74b5-94a9-4ea8-bc6f-95bde10d0677.jpg?v=1779849933","url":"https:\/\/www.spareoil.com\/products\/tei14949-allen-bradley-series-datasheet-technical-manual","provider":"SpareOil Automation","version":"1.0","type":"link"}