{"product_id":"yokogawa-aam10-s1-centum-analog-input-modules","title":"Yokogawa AAM10-S1 CENTUM Analog Input Modules","description":"\u003ch2\u003eYOKOGAWA AAM10-S1 Analog Input Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYOKOGAWA AAM10-S1\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eAAM10\u003c\/strong\u003e Analog Input Module, operates as a dedicated hardware component for analog signal acquisition within CENTUM CS 1000 and CS 3000 networks. Configured to interface with process transmitters, the hardware accepts continuous current inputs and transforms these electrical quantities into discrete digital values for the upstream control system. The hardware runs continuous background analog-to-digital conversions, mapping input loops without active digital field bus modulation layers.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eAAM10-S1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eJapan \/ Singapore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e 0.2 kg (Net module weight) \/ 0.63 kg (Package weight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e125 mm x 130 mm x 248 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +50 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBase logic load supplied via backplane interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Compatibility\u003c\/td\u003e\n\u003ctd\u003eCENTUM CS 1000, CS 3000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal Input\u003c\/td\u003e\n\u003ctd\u003eCurrent input (Typically 4-20 mA loops)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation\u003c\/td\u003e\n\u003ctd\u003eGalvanic isolation per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e5.0 VDC (Derived from Node Interface Unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Units\u003c\/td\u003e\n\u003ctd\u003eAND50, ANS50, AND20, ANS20 Node Interface Units, PFCS\/PFCD Stations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Options\u003c\/td\u003e\n\u003ctd\u003eNode Interface Unit slot, I\/O Expansion Rack assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCE, industrial safety compliance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDistributed Control System Technical Characteristics\u003c\/h3\u003e\n\u003cp\u003eOperating within the internal architecture of the CENTUM station platform, the module executes point-to-point analog scanning cycles through specialized input filtering circuitry. Active galvanic channel-to-channel isolation parameters decouple the low-voltage processing core from physical loop transients, preventing common-mode voltage disruptions from skewing the measurement registers. The hardware strips high-frequency noise from the incoming 4-20 mA current loops, maintaining signal integrity prior to the multiplexing stage without relying on digital field communication protocols.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can an engineer hot-swap the AAM10-S1 module while the Node Interface Unit backplane is energized?\u003c\/p\u003e\n\u003cp\u003eA: No. Technicians must isolate the power feed to the host Node Interface Unit or I\/O Expansion Rack before extracting or inserting the AAM10-S1 module. Hot-plugging the device introduces voltage spikes that can permanently break down the logic components.\u003c\/p\u003e\n\u003cp\u003eQ: Does the AAM10-S1 process digital diagnostic variables from HART-enabled smart transmitters?\u003c\/p\u003e\n\u003cp\u003eA: No. The AAM10-S1 functions strictly as a basic analog current input module. It lacks the internal modem circuitry required to demodulate or decode HART or BRAIN digital communication protocols; reading smart variables requires specialized communication-enabled input modules.\u003c\/p\u003e\n\u003cp\u003eQ: What mitigation is required if the localized internal cabinet temperature fluctuates above 50 deg C?\u003c\/p\u003e\n\u003cp\u003eA: The technical envelope restricts continuous execution to +50 deg C. Environments exceeding this parameter necessitate forced air circulation via louver fans or dedicated instrument enclosure cooling units to counteract measurement drift and prevent thermal degradation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Seating:\u003c\/strong\u003e Align the top and bottom edges of the module with the guide channels of the assigned Node Interface Unit or I\/O Expansion Rack slot. Press the module inward until the rear pins seat completely into the backplane connector, then secure the front retention hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding Standards:\u003c\/strong\u003e Verify that the primary Instrument Earth bar within the control cabinet maintains a low-impedance electrical path to the facility grounding grid. Ensure that the grounding fingers on the module housing establish complete metal-to-metal continuity with the rack chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRouting Restrictions:\u003c\/strong\u003e Lay all low-voltage analog signal cables inside dedicated, enclosed wiring ducts. Maintain a clear separation distance of at least 300 mm from power distribution lines and AC switching elements to eliminate inductive noise coupling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShield Handling:\u003c\/strong\u003e Terminate the shield braid of all incoming 4-20 mA instrument loops at the designated cabinet grounding bus bar. Ground the shield at the cabinet end only to prevent building up potential differences and circulating ground loops.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43698426642522,"sku":"AAM10","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/651.jpg?v=1784683822","url":"https:\/\/www.spareoil.com\/products\/yokogawa-aam10-s1-centum-analog-input-modules","provider":"SpareOil Automation","version":"1.0","type":"link"}