{"product_id":"yokogawa-avr10d-q22011-centum-vp-duplexed-v-net-router","title":"Yokogawa AVR10D-Q22011 CENTUM VP Duplexed V Net Router","description":"\u003ch2\u003eYokogawa AVR10D-Q22011 Duplexed V Net Router\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eYokogawa AVR10D-Q22011\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eAVR10D\u003c\/strong\u003e Duplexed V Net Router, operates as a dedicated hardware component for multi-network protocol bridging within CENTUM VP, CENTUM CS 3000, CENTUM CS, and CENTUM CS 1000 systems. Mounted directly in standard 19-inch equipment racks, the module establishes continuous data routing between high-speed Vnet\/IP networks and legacy coaxial V net or VL net domains. The hardware executes dual-redundant frame conversion to link Human Interface Stations (HIS) with legacy field control architecture without interrupting process bus communication.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAVR10D-Q22011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYokogawa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOrigin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSingapore\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e178 mm x 127 mm x 109 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Temp\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110 VA (220-240 V AC operation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVnet\/IP Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100BASE-TX, 100 Mbps full duplex, RJ45 (CAT5e or higher, max 100 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eV net \/ VL net Interface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 Mbps coaxial cable via T-junction BNC connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e220-240 V AC (dual-line or single-line supply)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGrounding\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM4 screw terminal dedicated lug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMounting\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19-inch rack mount format (4 x M5 screws with insulation bushes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRedundancy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-redundant communication buses and dual power supply support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-20 to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating Humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10% to 90% RH (non-condensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003e4-20 mA HART Loop Protocol and Channel Isolation\u003c\/h3\u003e\n\u003cp\u003eThe AVR10D-Q22011 acts as a deterministic communication bridge that segregates field-level loop traffic from supervisory control layers. While field control units handle direct 4-20 mA HART loop protocol conversions and analog channel isolation at the node level, the AVR10D router packages these sub-system data packets across its redundant backplane. Internal channel-to-channel isolation hardware and shielded network terminations protect high-speed Ethernet routing planes from ground voltage offsets and noise spikes originating on legacy coaxial V net segments, preserving real-time HART diagnostic pass-through across multi-project system boundaries.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How does the duplexed architecture respond when one coaxial V net segment suffers a cable break?\u003c\/p\u003e\n\u003cp\u003eA: The router continuously monitors bus carrier signals and instantly transfers data transmission to the secondary redundant coaxial path without dropping active network frames or tripping system alarms.\u003c\/p\u003e\n\u003cp\u003eQ: What insulation hardware is required when securing the unit inside a standard 19-inch cabinet rack?\u003c\/p\u003e\n\u003cp\u003eA: Engineers must install the factory-supplied insulation bushes along with the four M5 mounting screws to isolate the router chassis from frame ground currents and preserve cabinet earth integrity.\u003c\/p\u003e\n\u003cp\u003eQ: Can the 100BASE-TX Vnet\/IP port connect directly to a standard commercial Ethernet switch?\u003c\/p\u003e\n\u003cp\u003eA: Connection requires standard CAT5e or better shielded twisted-pair cabling up to 100 m, routed through industrial-grade switches qualified for CENTUM VP deterministic bus communication to prevent packet jitter.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eWhen installing the Yokogawa AVR10D-Q22011 router within process control enclosures, execute the following procedures:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePosition the 5.8 kg assembly into a standard 19-inch equipment rack and secure it using four M5 screws fitted with the mandatory insulation bushes.\u003c\/li\u003e\n\u003cli\u003eConnect the earth ground lead directly from the M4 chassis ground terminal to the main cabinet ground bar using a short, low-impedance copper strap.\u003c\/li\u003e\n\u003cli\u003eAttach the V net \/ VL net coaxial cables to the BNC ports using proper T-junction connectors, ensuring that unused cable ends receive standard 50 Ohm or 75 Ohm coaxial terminators as dictated by net topology.\u003c\/li\u003e\n\u003cli\u003eInsert shielded CAT5e cables into the 100BASE-TX RJ45 ports for the Vnet\/IP link, maintaining a minimum physical separation of 300 mm from high-voltage power conduits.\u003c\/li\u003e\n\u003cli\u003eApply 220-240 V AC operating power to both primary and secondary power supply terminal blocks to enable full dual-line power supply redundancy.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Yokogawa","offers":[{"title":"Default Title","offer_id":43855772745818,"sku":"AVR10D-Q22011","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0710\/5957\/0778\/files\/820.jpg?v=1786934975","url":"https:\/\/www.spareoil.com\/products\/yokogawa-avr10d-q22011-centum-vp-duplexed-v-net-router","provider":"SpareOil Automation","version":"1.0","type":"link"}