ADV569-P00 Yokogawa Digital Output Module

ADV569-P00 Yokogawa CENTUM VP 64 Channel Digital Output Module

ADV569-P00 Yokogawa CENTUM VP 64 Channel Digital Output Module

Disponibilidad: 20 Quedan en stock

Yokogawa ADV569-P00 Digital Output Module The Yokogawa ADV569-P00, also cataloged as the ADV569 Digital Output Module, operates as a dedicated...

Código: ADV569-P00

Manufacturer: Yokogawa
Product No.: ADV569-P00
Product Type: Digital Output Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 400g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Yokogawa ADV569-P00 Digital Output Module

The Yokogawa ADV569-P00, also cataloged as the ADV569 Digital Output Module, operates as a dedicated hardware component for high-density discrete load switching and time-proportional pulse control within CENTUM VP control networks.

Suffix Breakdown & Model Matrix

Code / Suffix	Description	Technical Implication
ADV569	Base Hardware Model	High-density digital output module for compatible ST7 terminal blocks
-P	Function Option	Integrates pulse width output and time-proportional control logic
0	Reserved Code	Standard factory designation (always 0)
0	Type Option	Basic hardware specification

Hardware Specifications

Parameter	Specification
Model	ADV569-P00
Brand	Yokogawa
Origin	Japan
Weight	0.40 kg Net / 2.0 kg Shipping
Dimensions	130 x 100 x 30 mm
Operating Temp	-20 to +70 deg C
Power Consumption	10 W nominal
Output Channels	64 channels (isolated, common minus side every 16 channels)
Output Signal Type	Current sink, 24 VDC switching
Output Response Time	<= 16 ms typical (pulse width adjustable 8 ms to 7200 s)
Protection Circuits	Short-circuit and overload protection built-in
Bus Integration	Connects via ESB optical bus to Field Control Units

Process Control and DCS Output Switching

The module interface handles high-density output processing across 64 discrete channels, using common negative side isolation grouped per 16 channels to isolate external load loops. It integrates directly with Field Control Units over optical ESB bus backplanes, delivering precise signal actuation for solenoid valves, motor starter interlocks, and alarm annunciators. Internal optocoupler hardware ensures channel-to-system isolation, preventing external field transients from disturbing internal process control logic.

Frequently Asked Questions

Q: Can an ADV569-P00 module be replaced online without disrupting the node?

A: Yes. You can remove and replace the ADV569-P00 under live system power without de-energizing the baseplate or interrupting signal execution on adjacent modules.

Q: What functionality does the "-P" suffix add to the digital outputs?

A: The "-P" suffix enables onboard pulse width output and time-proportional output processing, allowing software control loops to adjust drive signal duration from 8 ms to 7200 s directly at the hardware layer.

Q: How is field-side electrical isolation structured across the output channels?

A: Channel isolation is arranged with common minus terminals per 16 channels, providing galvanic separation between channel banks and logic circuits to block loop fault propagation.

Field Installation Guidelines

Baseplate Slot Insertion: Seat the module firmly into the targeted baseplate slot until upper and lower retaining clips click into place. Confirm full backplane connector engagement before applying external 24 VDC power.
Cabinet Shielding and Earth Strapping: Attach the cabinet metal housing to the plant safety earth copper bar via a dedicated low-impedance ground wire. Ground signal cable shields at a single point to eliminate ground potential loops.
DC Load Wiring Separation: Lay 24 VDC field output lines in separate wire channels away from high-voltage AC cables and sensitive analog measurement lines to suppress electromagnetic interference.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.