Allen-Bradley 1746-C16 SLC 500 Interconnect Cable 4ft

Allen-Bradley 1746-C16 SLC 500 Chassis Interconnect Cable

Disponibilidad: 8 Quedan en stock

DescriptionThe Allen-Bradley 1746-C16 is a specialized ribbon cable designed for multi-chassis configurations within the SLC 500 modular control system. Measuring...

Código: 1746-C16

Manufacturer: Allen-Bradley
Product No.: 1746-C16
Product Type: PLC Interconnect Cable
Product Origin: USA
Payment:T/T, Western Union
Weight: 230g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Description

The Allen-Bradley 1746-C16 is a specialized ribbon cable designed for multi-chassis configurations within the SLC 500 modular control system. Measuring 1.22 meters (4 feet / 50 inches), this cable provides the necessary reach to connect a primary processor chassis to expansion chassis within the same industrial enclosure. It ensures reliable backplane communication, allowing the SLC 500 processor to manage I/O modules located in secondary racks.

Features

System Compatibility: Specifically designed for Allen-Bradley SLC 500 modular chassis systems.
Extended Reach: Longest available interconnect cable for the SLC 500 platform at 1.22 meters.
Robust Construction: Rigid ribbon cable design featuring integrated strain relief for industrial durability.
Keyed Connectors: Engineered with physical keys to ensure correct orientation and prevent improper backplane connection.

Applications

This cable is essential for expanding SLC 500 systems beyond a single rack. It is typically used in control cabinets where I/O requirements exceed the capacity of a single chassis, allowing for vertical or side-by-side expansion of the PLC architecture.

Technical Specifications

Brand	Allen-Bradley
Product Line	SLC 500
Hardware Type	Chassis Interconnect Cable
Cable Length	1.22 meters (50 inches / 4 feet)
Max Linked Chassis	3 total (including primary)
Bend Radius Clearance	101.6 mm (4 inches)
Operating Temperature	0 to 60 degC (32 to 140 degF)

Installation Guidelines

Power Status: Always ensure the system power supply is disconnected before installing or removing the interconnect cable.
Orientation: The connector with the key on the top must be inserted into the right-hand socket of the exit chassis. The connector with the key on the inside must be inserted into the left-hand socket of the expansion chassis.
Clearance: Ensure a minimum bend radius clearance of 101.6 mm (4 inches) to prevent cable damage and signal interference.
Sequence: It is recommended to route and connect the cable before installing power supplies to ensure sufficient physical space and clearance.

FAQ

Is the 1746-C16 compatible with all SLC 500 chassis?

Yes, the 1746-C16 is designed for use with standard SLC 500 modular chassis to facilitate multi-rack communication.

Can I use this cable to connect more than three chassis?

No, the SLC 500 system architecture typically supports a maximum of three total chassis (one primary and two expansion) when using these interconnect cables.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.