NFAI841-S50 Yokogawa FIO Series Datasheet & Technical Manual

Analog Input Output Module | Yokogawa NFAI841-S50

Analog Input Output Module | Yokogawa NFAI841-S50

Disponibilidad: 10 Quedan en stock

Yokogawa NFAI841-S50 Analog I/O Module The Yokogawa NFAI841-S50, also cataloged as the NFAI841 Analog I/O Module, operates as a dedicated...

Código: NFAI841-S50

Manufacturer: Yokogawa
Product No.: NFAI841-S50
Product Type: Analog Input Output Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Yokogawa NFAI841-S50 Analog I/O Module

The Yokogawa NFAI841-S50, also cataloged as the NFAI841 Analog I/O Module, operates as a dedicated hardware component for simultaneous 4-20 mA DC input and output signal processing within CENTUM VP Distributed Control System platforms.

Suffix Breakdown & Model Matrix

NFAI841: Analog I/O Module (4 to 20 mA, 8-channel input / 8-channel output)
-S: Standard hardware type
5: Basic type with no intrinsic explosion protection
0: Basic type with standard conformal coating

Hardware Specifications

Parameter	Specification
Model	NFAI841-S50
Brand	Yokogawa
Origin	Japan
Weight	0.35 to 0.45 kg
Dimensions	Standard FIO single-slot width
Operating Temp	-20 deg C to +70 deg C
Power Consumption	230 mA (5 V DC), 540 mA (24 V DC)
Input Channels	8 channels, non-isolated, 4-20 mA DC
Output Channels	8 channels, non-isolated, 4-20 mA DC
Accuracy	+/- 16 uA
Temperature Drift	+/- 16 uA per 10 deg C
Data Update Period	10 ms
Isolation	1500 V AC between I/O channels and system backplane (1 min)
Environmental Rating	ISA G3 corrosion resistance

DCS Process Control & Instrumentation Attributes

The NFAI841-S50 integrates 8 analog input channels and 8 analog output channels onto a single FIO card footprint. To preserve signal fidelity, the module utilizes internal multiplexing linked to a central analog-to-digital converter for inputs, and independent digital-to-analog converters for loop current outputs. While individual channels share a common negative return path (non-isolated design), a 1500 V AC galvanic isolation barrier separates the entire process-side circuitry from the sensitive backplane logic. This design shields the controller network from high common-mode field disturbances and electrical line noise.

Frequently Asked Questions

Q: How should power distribution be structured given that the channels are non-isolated?

A: Because the 8 input and 8 output channels share a common internal ground line, you must ensure that all external field loops operate on the same potential. Avoid connecting transmitters powered from different non-isolated power grids to prevent ground loops.

Q: Is this combined I/O module compatible with dual-redundant deployment?

A: Yes. The NFAI841-S50 supports dual-redundant installation slots. If a critical internal component fails, the system triggers a seamless switchover to the redundant module without disrupting active field loop output values.

Q: Can this standard module connect directly to field transmitters in Zone 1 or Zone 2 hazardous areas?

A: No. Suffix codes "5" and "0" denote a lack of internal explosion-proof protection. Any field signals routed from hazardous classification zones must pass through external intrinsic safety barriers or galvanic isolators before entering the module.

Field Installation Guidelines

Mounting Method: Insert the module vertically into the designated slot of the FIO node unit rack. Ensure the retaining levers lock securely to prevent communication disruption with the backplane bus.
Cabling Integrity: Make field terminations using standard pressure clamp terminal blocks or dedicated KS1 interface cables. Securely torque terminal screws to minimize junction resistance on the 4-20 mA loops.
Grounding Configuration: Connect the overall cable shields to the designated system cabinet instrument ground bar. Avoid multiple shield ground points to prevent circulating loop currents.
Thermal Constraints: Maintain adequate cabinet ventilation. If ambient internal temperatures approach the upper 70 deg C operating threshold, arrange hardware configurations to space out modules and prevent thermal drift.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.