- +8618030270289
- Ubicación de la tienda
YOKOGAWA NM29*A Node Interface Module
The YOKOGAWA NM29*A, also cataloged as the NM29*A Node Interface Module, operates as a dedicated hardware component for communication gateway execution within CENTUM VP and ProSafe-RS control platform networks.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | NM29*A |
| Brand | YOKOGAWA |
| Origin | Japan |
| Weight | 0.3 kg |
| Dimensions | 130 mm x 100 mm x 35 mm |
| Operating Temp | -20 deg C to 60 deg C |
| Power Consumption | 24 VDC nominal |
| Performance | High-speed system bus interface with dual redundancy |
Process Control and DCS Connectivity
The NM29*A serves as the primary gateway between distributed I/O modules and the control processor, utilizing 4-20 mA HART loop protocol standards for data interchange. The architecture supports redundant communication paths, facilitating high-availability architectures common in safety-critical systems. To ensure signal integrity, the module maintains channel-to-channel isolation, preventing electrical noise ingress into the system bus. Furthermore, the unit supports cold junction compensation (CJC) for connected thermocouple inputs, providing high-precision acquisition during temperature-sensitive process monitoring across integrated DCS/SIS installations.
Frequently Asked Questions
Q: Does the NM29*A support hot-swapping within the I/O rack during system operation?
A: Yes, the module supports hot-swapping; however, ensure that the corresponding communication port on the redundant module is active and initialized before extraction to maintain seamless data link integrity and prevent network communication errors.
Q: How is the redundant communication switch-over triggered?
A: The switch-over occurs automatically when the node interface detects a communication fault or loss of signal integrity on the active port; the module logic subsequently shifts the control/stand-by status to the redundant gateway to maintain process visibility.
Field Installation Guidelines
Mount the NM29*A securely into the designated node interface slot on the rack backplane, ensuring the connector pins are correctly aligned before engaging the locking mechanism. Terminate the system bus cabling to the specified ports, ensuring that cable routing maintains minimum separation from high-voltage AC lines to prevent induced interference. Verify that the 24 VDC supply voltage is measured at the terminal block to confirm stable power delivery within specifications. Upon installation, use the system engineering tool to verify that the node link status is active and that the redundant communication path is synchronized before finalizing the commissioning of the I/O loops.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
Yokogawa RB401-S4 RIO Bus Module Remote I/O Communication
$99.00
$199.00
Digital Output Module | Yokogawa SDV541-S53 ProSafe-RS
$99.00
$199.00
Yokogawa ATR8S-00 S2 Relay Output Module CENTUM DCS Series
$99.00
$199.00
Yokogawa AAM21-S2 Analog Input Module CENTUM DCS Series
$99.00
$199.00
Yokogawa AIP512-S2 Analog Input Module CENTUM VP DCS Series
$99.00
$199.00
Terminal I/O Module Nest CENTUM DCS Yokogawa AMN31-S1
$99.00
$199.00
MRO-234-A Yokogawa Relay Output Module Interface Card
$99.00
$199.00
RB301-S2 Yokogawa CENTUM CS Bus Interface Master Module
$99.00
$199.00
Yokogawa RB401-S4 RIO Bus Interface Master Card CENTUM CS/VP
$99.00
$199.00
Analog Output Module | YOKOGAWA AAM51-S2
$99.00
$199.00
YOKOGAWA FC1*C Interface Module Card
$99.00
$199.00
AAM10-S1 YOKOGAWA | Analog Input Module
$99.00
$199.00
YOKOGAWA AAM50-S1 Analog Output Module
$99.00
$199.00
NC4*B YOKOGAWA Node Control Unit
$99.00
$199.00
YOKOGAWA NCU4*A Node Control Unit Original
$99.00
$199.00
YOKOGAWA S9171BG-00 PAC*A Programmable Automation Controller
$99.00
$199.00
Módulo de E/S de control remoto YOKOGAWA RC1*A CENTUM VP
$99.00
$199.00
Tarjeta de interfaz YOKOGAWA RS81*B CENTUM XL Micro XL
$99.00
$199.00
Módulo de E/S analógicas con HART Yokogawa Centum VP VM1*D
$99.00
$199.00
Módulo Repetidor de Bus YNT512D-Q12 YOKOGAWA CENTUM VP
$99.00
$199.00
Módulo de entrada analógica YOKOGAWA AAM21-S2 CENTUM CS 3000
$99.00
$199.00
F3BU13-0N FA-M3 YOKOGAWA Unidad Base de PLC de 13 Ranuras
$99.00
$199.00
Módulo de comunicación Ethernet F3LE12-0T FA-M3 de YOKOGAWA
$99.00
$199.00
YOKOGAWA F3LR02-0N Módulo de interfaz de redundancia FA-M3
$99.00
$199.00
F3XC08-0C FA-M3 Módulo de relé de salida digital de YOKOGAWA
$99.00
$199.00
Módulo de Entrada Digital Serie FA-M3 F3XD16-3F de YOKOGAWA
$99.00
$199.00
Módulo de E/S Analógicas YOKOGAWA AAP135-S00 CENTUM VP
$99.00
$199.00
Módulo de salida analógica YOKOGAWA AAI543-S50 CENTUM VP
$99.00
$199.00
F3YC08-0C YOKOGAWA FA-M3 Hoja de datos y manual técnico
$99.00
$199.00
Módulo de entrada analógica YOKOGAWA AAR145-S00 CENTUM VP
$99.00
$199.00
Módulo de entrada analógica YOKOGAWA AAR181-S00 CENTUM VP
$99.00
$199.00
Módulo de entrada digital YOKOGAWA ADV159-P00 S1
$99.00
$199.00
Translation missing: es.general.search.loading