- +8618030270289
- Ubicación de la tienda
YOKOGAWA RC1*A Remote Control I/O Module
Configured for field signal termination and remote control execution in CENTUM VP and CS 3000 DCS platforms, the YOKOGAWA RC1*A (RC1A Remote I/O Module) provides direct physical/electrical execution of sensor-to-controller signal interface management.
Suffix Breakdown & Model Matrix
- RC1: Base model identifier for remote control I/O functionality and signal interface management.
- *A: Hardware revision and interface designation indicating compatibility with standard CENTUM DCS bus architectures.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | RC1*A |
| Brand | YOKOGAWA |
| Origin | Japan |
| Weight | 1.5 kg |
| Dimensions | 254 × 152 × 127 mm |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | 24 V DC |
| I/O Type | Remote I/O (Analog/Digital) |
| Isolation | Electrical |
| Protection | Built-in Surge Suppression |
DCS Process Control & Connectivity Attributes
The RC1*A executes high-speed signal processing between field instrumentation and the DCS backplane. To ensure data consistency across distributed networks, the module supports Modbus RTU and Modbus TCP communication protocols, allowing for deterministic data exchange. Channel-to-channel isolation is integrated within the signal path to prevent ground-loop interference and common-mode transients. Furthermore, the module facilitates cold junction compensation (CJC) for integrated temperature inputs, ensuring that terminal temperature fluctuations do not impact the precision of the connected instrumentation. Continuous self-diagnostics monitor the integrity of the input channels, providing proactive fault detection before signal degradation occurs.
Frequently Asked Questions
Q: Does the RC1*A support hot-swapping within the DCS rack? A: Module replacement must be performed in accordance with the specific system power-down sequence. Always verify the status of the redundant controller and communication bus before disconnecting the module to prevent backplane bus errors.
Q: Are the Modbus RTU and TCP protocols mutually exclusive on this module? A: The module architecture supports concurrent protocol handling; however, confirm the specific channel configuration mapping to ensure that digital data frames are correctly routed to the intended communication registers.
Q: How is the output current limit managed during actuator control? A: The module is rated for a continuous output current of 1 A. Over-current protection circuitry is active; ensure the connected load impedance does not exceed the power supply limits to prevent thermal shutdown of the output channel.
Field Installation Guidelines
- Mounting: Secure the module into the designated DCS rack slot. Tighten all retaining screws to ensure a low-impedance ground bond between the module chassis and the cabinet earth to maximize the effectiveness of the internal surge protection.
- Wiring: Utilize shielded twisted-pair instrumentation cable for all analog signal loops. Terminate cable shields at a centralized cabinet-level grounding rail to provide a low-resistance path for electromagnetic noise suppression.
- Isolation: Maintain a minimum clearance of 150 mm between signal cabling and high-voltage AC lines to prevent inductive noise coupling into the sensitive signal processing stages.
- Environmental: Ensure adequate airflow within the rack to maintain the module operating temperature within the specified range of -20 deg C to +70 deg C.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
Multi Status Input Interface Card YOKOGAWA ST2*D CENTUM VP
$99.00
$199.00
ST3*D YOKOGAWA CENTUM VP Multi Status Input Interface Card
$99.00
$199.00
HART-Enabled Analog I/O Module YOKOGAWA VM1*B CENTUM VP
$99.00
$199.00
VM1*D YOKOGAWA CENTUM VP HART-Enabled Analog I/O Module
$99.00
$199.00
YOKOGAWA VM2*D CENTUM VP HART-Enabled Analog I/O Module
$99.00
$199.00
YOKOGAWA AAM21-S2 CENTUM CS 3000 Analog Input Module
$99.00
$199.00
AMM12T-S2 YOKOGAWA CENTUM VP Analog Input Multiplexer Module
$99.00
$199.00
YOKOGAWA F3CX04-0N FA-M3 4-Channel Pulse Input Module
$99.00
$199.00
YOKOGAWA F3AD08-4V FA-M3 8-Channel Analog Input Module
$99.00
$199.00
YOKOGAWA ST4*D CENTUM VP Multi Status Input Interface Card
$99.00
$199.00
F3XC08-0C FA-M3 YOKOGAWA Digital Output Relay Module
$99.00
$199.00
YOKOGAWA F3XD16-3F FA-M3 Series Digital Input Module
$99.00
$199.00
Analog Input Output Module YOKOGAWA AAP135-S00 CENTUM VP
$99.00
$199.00
AAM11-S2 YOKOGAWA Analog Input Module Process Control
$99.00
$199.00
YOKOGAWA AAI543-S50 CENTUM VP Analog Output Module
$99.00
$199.00
F3YC08-0C YOKOGAWA FA-M3 Datasheet & Technical Manual
$99.00
$199.00
Analog Input Module YOKOGAWA AAR145-S00 CENTUM VP
$99.00
$199.00
YOKOGAWA AAR181-S00 CENTUM VP Analog Input Module
$99.00
$199.00
Analog Input Modules CENTUM VP Series YOKOGAWA ADM11-S3
$99.00
$199.00
YOKOGAWA ADV159-P00 S1 Digital Input Module
$99.00
$199.00
Yokogawa AIP571 S1 Fieldbus Interface Module
$99.00
$199.00
Yokogawa ADV551-P00 Digital Output Module 32-Channel
$99.00
$199.00
Yokogawa AIP571 S2 Fieldbus Interface Module
$99.00
$199.00
Yokogawa AMM32-S3 Digital Input Module 32-Channel
$99.00
$199.00
ALU4-D Yokogawa Modular Analog Input I/O System
$99.00
$199.00
Analog Input Module for DCS Control Yokogawa AMM42-S4
$99.00
$199.00
Yokogawa AMN11-S1 Analog I/O Nest for CENTUM Systems
$99.00
$199.00
Thermocouple Input Module Yokogawa CT5-TJ*A
$99.00
$199.00
AMM12 S3 YOKOGAWA Voltage Input Multiplexer Module
$99.00
$199.00
Módulo de Salida Analógica Yokogawa ATA4D-00 S2 Serie CENTUM
$99.00
$199.00
ADM12-S4 Yokogawa Módulo de Entrada Digital Serie CENTUM
$99.00
$199.00
Módulo de Entrada Analógica de 16 Canales AAM11B de YOKOGAWA
$99.00
$199.00
Translation missing: es.general.search.loading