F3CU04-0S/Z01 Yokogawa FA-M3 Datasheet & Technical Manual

Temperature Control Modules | Yokogawa F3CU04-0S/Z01 FA-M3

Temperature Control Modules | Yokogawa F3CU04-0S/Z01 FA-M3

Disponibilidad: 20 Quedan en stock

Yokogawa F3CU04-0S/Z01 Temperature Control & PID Module The Yokogawa F3CU04-0S/Z01, also cataloged as the F3CU04-0S Temperature Control & PID Module,...

Código: F3CU04-0S/Z01

Manufacturer: Yokogawa
Product No.: F3CU04-0S/Z01
Product Type: Temperature Control Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Yokogawa F3CU04-0S/Z01 Temperature Control & PID Module

The Yokogawa F3CU04-0S/Z01, also cataloged as the F3CU04-0S Temperature Control & PID Module, operates as a dedicated hardware component for closed-loop temperature and process control execution within FA-M3 PLC platforms.

Hardware Specifications

Parameter	Specification
Model	F3CU04-0S/Z01
Brand	Yokogawa
Origin	Japan
Weight	200 g (1.10 lbs packaging weight)
Dimensions	28.9 (W) x 100 (H) x 106.1 (D) mm
Operating Temp	0 deg C to +55 deg C
Storage Temp	-20 deg C to +70 deg C
Power Consumption	460 mA at 5 VDC (24 VDC external auxiliary input at 50 mA)
Control Loops	4 loops (independent)
Slot Size	Single-slot
Input Types	Universal: Thermocouple (15 types), RTD (9 types), DC voltage (mV/V)
Sampling Period	200 ms (4 loops), 100 ms (2 loops)
Input Accuracy	+/-0.1% of full scale
Input Resolution	0.1 deg C
Isolation	Photocoupler and transformer isolation, withstand 1500 VAC for 1 min
Output Type	Time-proportional PID (open collector, relay/SSR compatible)
Alarm Functions	12 types (upper/lower limit, deviation alarms)
Alarm Outputs	4 points per loop (with relay linkage for alarms 1 & 2)
Auto-tuning	Dynamic auto-tuning with fuzzy logic overshoot suppression
Control Modes	Cascade control, Heating/Cooling control supported

Channel Isolation and Cold Junction Compensation

The module incorporates transformer and photocoupler isolation across input channels, yielding a dielectric withstand strength of 1500 VAC for 1 minute between signal inputs and internal logic circuitry. Integrated cold junction compensation (CJC) processing operates across all configurable thermocouple ranges, converting microvolt-level thermoelectric potentials into calibrated 0.1 deg C digital values. Sensor input terminals support universal wiring topologies, allowing differential analog sampling for thermocouples, 3-wire RTDs, and low-level DC voltage inputs without external signal conditioning barriers.

Frequently Asked Questions

Q: What input sampling speeds are achieved across active control loops? A: The module executes input sampling and PID calculation every 200 ms when operating all 4 loops, or accelerates to 100 ms when restricted to 2 loops.

Q: What cold junction compensation and isolation features protect the temperature inputs?

A: Internal CJC circuitry auto-corrects thermocouple readings while transformer and photocoupler isolation prevents field noise up to 1500 VAC from entering the FA-M3 backplane bus.

Q: How does the dynamic auto-tuning capability handle setpoint variations? A: The module calculates optimal PID parameters automatically upon startup and recalculates constants when operators adjust setpoints or process conditions shift during operation.

Field Installation Guidelines

Insert the single-slot module into a designated rack slot on the FA-M3 base unit until the lock mechanism engages. Allow a minimum warm-up period of 30 minutes following power application before conducting calibration or active process execution. Route thermocouple and RTD wiring away from high-voltage motor power leads using grounded shielded cable to minimize electromagnetic interference. Ground cable shields at a single point on the main system signal ground busbar. Verify that any threaded conduit entries achieve a minimum engagement of 5 full NPT threads to satisfy enclosure integrity standards.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.