AAI841-H00 YOKOGAWA Analog I/O Module Datasheet & Manual

YOKOGAWA AAI841-H00 Analog I/O Module 8-Channel HART

YOKOGAWA AAI841-H00 Analog I/O Module 8-Channel HART

Disponibilidad: 10 Quedan en stock

YOKOGAWA AAI841-H00 Analog I/O Module The YOKOGAWA AAI841-H00, also cataloged as the AAI841 Analog I/O Module, operates as a dedicated...

Código: AAI841-H00

Manufacturer: Yokogawa
Product No.: AAI841-H00
Product Type: Analog I/O Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

YOKOGAWA AAI841-H00 Analog I/O Module

The YOKOGAWA AAI841-H00, also cataloged as the AAI841 Analog I/O Module, operates as a dedicated hardware component for simultaneous 8-channel analog input and 8-channel analog output execution within CENTUM VP process control platforms.

Suffix Breakdown & Model Matrix

AAI841: Base model for 8-channel analog input/8-channel analog output (4-20 mA).
-H: Indicates support for digital communication via HART protocol.
00: Standard base version.
K4A00: Option code representing the inclusion of the ATK4A-00 KS cable interface adapter for system cabling.

Hardware Specifications

Parameter	Specification
Model	AAI841-H00
Brand	YOKOGAWA
Origin	Japan
Weight	0.3 kg (Module), 2.0 kg (Total shipping weight)
Dimensions	Standard I/O module footprint
Operating Temp	-20 deg C to 70 deg C
Power Consumption	310 mA (5 VDC), 500 mA (24 VDC)
I/O Channels	8 Inputs / 8 Outputs (non-isolated)
Output Load	0 to 750 Ohm
Accuracy	Input: +/-16 uA, Output: +/-48 uA
Data Update Period	10 ms

DCS Process Control & Connectivity

The AAI841 utilizes the 4-20 mA HART loop protocol to manage bidirectional communication with smart field instruments. The module executes precise loop control by maintaining a consistent 40 ms output step response and 100 ms input step response. Given the non-isolated circuit design, the module manages common-mode voltage fluctuations through high-impedance input stages (min 500 kOhm power-off resistance). Furthermore, the internal logic provides active transmitter power supply regulation, maintaining between 14.8 VDC and 26.4 VDC, which allows for selectable 2-wire or 4-wire transmitter compatibility on a per-channel basis.

Frequently Asked Questions (FAQ)

Q: Does the AAI841-H00 support online module replacement (hot-swap)?

A: Yes, the module supports hot-swapping when configured within a dual-redundant pair to maintain process continuity.

Q: How does the module handle circuit-open conditions?

A: The AAI841 includes integrated diagnostic circuitry that triggers an open-circuit fault flag when output current drops below 0.65 mA.

Field Installation Guidelines

Grounding: Because the AAI841 channels are non-isolated, ensure that all signal commons are bonded to a common instrument ground bar to prevent circulating currents that could induce measurement offsets.
Shielding: Use shielded twisted-pair cabling for all analog signal runs. Terminate cable shields strictly at the field side or the cabinet entry point, but avoid ground loops by maintaining a single-point connection.
Thermal Management: Maintain a minimum clearance of 50 mm above and below the module to facilitate vertical airflow. In high-density cabinets, utilize forced ventilation to keep ambient temperatures below the 70 deg C limit.
Wiring Interface: When using the ATK4A-00 adapter, ensure all MIL connector latches are fully engaged and locked to prevent intermittent signal loss due to vibration or thermal expansion.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.