AAM11 S1 YOKOGAWA CENTUM VP Datasheet & Technical Manual

YOKOGAWA AAM11 S1 CENTUM VP 16-Channel Analog Input Module

YOKOGAWA AAM11 S1 CENTUM VP 16-Channel Analog Input Module

Disponibilidad: 99 Quedan en stock

YOKOGAWA AAM11 S1 Analog Input Module Configured for industrial process signal acquisition in CENTUM VP FIO subsystems, the YOKOGAWA AAM11...

Código: AAM11 S1

Manufacturer: Yokogawa
Product No.: AAM11 S1
Product Type: Analog Input Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 1200g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

YOKOGAWA AAM11 S1 Analog Input Module

Configured for industrial process signal acquisition in CENTUM VP FIO subsystems, the YOKOGAWA AAM11 S1 (AAM11 S1 Analog Input Module) provides direct physical and electrical execution of 16-channel DC voltage and current loop monitoring.

Hardware Specifications

Parameter	Specification
Model	AAM11 S1
Brand	YOKOGAWA
Origin	Japan
Weight	1.2 kg
Dimensions	482.6 mm x 132.5 mm x 3U
Operating Temp	0 deg C to 50 deg C
Power Consumption	0.6 A
Input Channels	16
Resolution	16-bit

DCS Process Control Integration

The AAM11 S1 supports the 4-20 mA HART loop protocol to enable intelligent device communication and diagnostic monitoring alongside primary process variable acquisition. The module design prioritizes channel-to-channel isolation, which effectively suppresses common-mode noise and prevents ground-induced errors common in large-scale plant signal distribution. Accuracy is maintained through high-resolution 16-bit digitization and the module's inherent ability to reject low-frequency electromagnetic interference. The device integrates seamlessly with CENTUM VP field control stations to provide deterministic signal updates for safety and process optimization.

Frequently Asked Questions

Q: Can the input range be changed without replacing the module?

A: Yes. The AAM11 S1 allows for signal selection between DC voltage (±10 V) and DC current (4-20 mA) via internal pin-based configuration or software settings, depending on the specific hardware revision.

Q: How does this module manage redundant signal acquisition?

A: In redundant configurations, two modules receive the same field signal inputs; the control system performs a comparison check between the two digitized values to ensure data integrity, automatically failing over to the secondary module if a diagnostic fault is detected in the primary.

Q: Is this module suitable for high-speed control loops (faster than 100 ms)?

A: No. The AAM11 S1 utilizes a 100 ms update cycle. If the control loop requires sampling speeds higher than this, an alternative high-speed I/O module must be selected.

Field Installation Guidelines

Ensure the FIO node backplane is powered down before module installation to prevent transient surges on the 24 VDC bus.
Terminate all field signals using shielded twisted-pair cables; connect the shield to the cabinet ground at the module's designated terminal point to maintain noise immunity.
Configure the input type (voltage vs. current) via physical pins or jumpers before applying system power, as incorrect configuration can damage the input circuitry.
Verify cable tightness at the screw terminals to prevent high-resistance connections that induce measurement drift.
Perform an initial loop check using a calibrated current/voltage source to confirm the module’s A/D conversion accuracy against the CENTUM VP engineering station readings.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.