- +8618030270289
- Ubicación de la tienda
YOKOGAWA AAM50-S1 Analog Output Module
Configured for precision analog signal generation in CENTUM VP and CS3000 control architectures, the YOKOGAWA AAM50-S1 (AAM50 Analog Output Module) provides direct physical and electrical execution of 8-channel current control.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | AAM50-S1 |
| Brand | YOKOGAWA |
| Origin | Singapore |
| Weight | 0.4 kg |
| Dimensions | 43 mm x 130 mm x 147 mm |
| Operating Temp | -20 deg C to 60 deg C |
| Power Consumption | 5 W |
| Performance | 8-channel 4-20 mA DC, +/- 0.1% accuracy |
Process Control and DCS Connectivity
The AAM50-S1 operates as an interface between the system controller and field-mounted actuators, utilizing the 4-20 mA HART loop protocol to transmit precise control commands. The module architecture incorporates channel-to-channel isolation, which prevents ground loops and electrical interference from degrading the analog signal quality in dense I/O configurations. Furthermore, the unit supports cold junction compensation (CJC) for integrated system applications, ensuring that output linearity is maintained across varying thermal conditions in process control and safety environments.
Frequently Asked Questions
Q: Does the AAM50-S1 support hot-swapping during active process control?
A: The module is designed for extraction within designated maintenance windows; however, users must verify that the control loop is set to manual mode or that the redundant controller has assumed command of the field devices to prevent output signal transients during removal.
Q: How should the load resistance be managed for the 4-20 mA outputs?
A: Each channel supports a load resistance of up to 2 kΩ, though optimal linearity is maintained at ≤600 Ω per channel; verify that field device impedance does not exceed these thresholds to avoid signal attenuation or output saturation.
Field Installation Guidelines
Mount the AAM50-S1 module onto a standard DIN rail or panel assembly within the control cabinet, ensuring that the backplane connector is fully engaged and the locking mechanism is secured. Terminate the output signals to the screw terminals using shielded twisted-pair cabling, with drain wires bonded to the cabinet ground bus at the entry point to mitigate electromagnetic ingress. Verify the 24 VDC power supply voltage at the terminal block before initializing the module. Following installation, use the system engineering tools to perform a loop check and confirm that output signals match the commanded digital values before enabling closed-loop control functions.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
Yokogawa RB401-S4 RIO Bus Module Remote I/O Communication
$99.00
$199.00
Digital Output Module | Yokogawa SDV541-S53 ProSafe-RS
$99.00
$199.00
Yokogawa ATR8S-00 S2 Relay Output Module CENTUM DCS Series
$99.00
$199.00
Yokogawa AAM21-S2 Analog Input Module CENTUM DCS Series
$99.00
$199.00
Yokogawa AIP512-S2 Analog Input Module CENTUM VP DCS Series
$99.00
$199.00
Terminal I/O Module Nest CENTUM DCS Yokogawa AMN31-S1
$99.00
$199.00
MRO-234-A Yokogawa Relay Output Module Interface Card
$99.00
$199.00
Analog Output Module | YOKOGAWA AAM51-S2
$99.00
$199.00
AAM10-S1 YOKOGAWA | Analog Input Module
$99.00
$199.00
Módulo de E/S de control remoto YOKOGAWA RC1*A CENTUM VP
$99.00
$199.00
Módulo de E/S analógicas con HART Yokogawa Centum VP VM1*D
$99.00
$199.00
Módulo de entrada analógica YOKOGAWA AAM21-S2 CENTUM CS 3000
$99.00
$199.00
F3XC08-0C FA-M3 Módulo de relé de salida digital de YOKOGAWA
$99.00
$199.00
Módulo de Entrada Digital Serie FA-M3 F3XD16-3F de YOKOGAWA
$99.00
$199.00
Módulo de E/S Analógicas YOKOGAWA AAP135-S00 CENTUM VP
$99.00
$199.00
Módulo de salida analógica YOKOGAWA AAI543-S50 CENTUM VP
$99.00
$199.00
F3YC08-0C YOKOGAWA FA-M3 Hoja de datos y manual técnico
$99.00
$199.00
Módulo de entrada analógica YOKOGAWA AAR145-S00 CENTUM VP
$99.00
$199.00
Módulo de entrada analógica YOKOGAWA AAR181-S00 CENTUM VP
$99.00
$199.00
Módulo de entrada digital YOKOGAWA ADV159-P00 S1
$99.00
$199.00
Módulo de interfaz de bus de campo Yokogawa AIP571 S1
$99.00
$199.00
Módulo de salida digital Yokogawa ADV551-P00 de 32 canales
$99.00
$199.00
Módulo de interfaz Fieldbus Yokogawa AIP571 S2
$99.00
$199.00
Módulo de entrada digital Yokogawa AMM32-S3 de 32 canales
$99.00
$199.00
Sistema de E/S de entrada analógica modular ALU4-D Yokogawa
$99.00
$199.00
Módulo de entrada de termopar Yokogawa CT5-TJ*A
$99.00
$199.00
Módulo multiplexor de entrada de tensión AMM12 S3 YOKOGAWA
$99.00
$199.00
Translation missing: es.general.search.loading