AAR181-S00 YOKOGAWA CENTUM VP Datasheet & Technical Manual

YOKOGAWA AAR181-S00 CENTUM VP Analog Input Module

YOKOGAWA AAR181-S00 CENTUM VP Analog Input Module

Disponibilidad: 10 Quedan en stock

YOKOGAWA AAR181-S00 Analog Input Module Configured for high-density signal acquisition in CENTUM VP / CS 3000 platforms, the YOKOGAWA AAR181-S00...

Código: AAR181-S00

Manufacturer: Yokogawa
Product No.: AAR181-S00
Product Type: Analog Input Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

YOKOGAWA AAR181-S00 Analog Input Module

Configured for high-density signal acquisition in CENTUM VP / CS 3000 platforms, the YOKOGAWA AAR181-S00 (AAR181 Analog Input Module) provides direct physical/electrical execution of 32-channel analog process data.

Suffix Breakdown & Model Matrix

AAR181: Base model identifier for 32-channel isolated analog input functionality.
-S: Standard hardware revision type.
00: Configuration codes denoting basic functionality without specialized protocol or environmental options.

Hardware Specifications

Parameter	Specification
Model	AAR181-S00
Brand	YOKOGAWA
Origin	Japan
Weight	0.45 kg
Dimensions	120 × 90 × 40 mm
Operating Temp	-10 deg C to +55 deg C
Power Consumption	5 V DC, 400 mA
Input Channels	32 (Isolated)
Signal Range	4-20 mA DC / 0-10 V DC
Resolution	16-bit
Accuracy	+/- 0.1% of span

Process Control & Isolation Attributes

The AAR181-S00 module integrates comprehensive channel-to-channel isolation rated at 1500 V AC to isolate field-side electrical noise from the system backplane. Within the CENTUM VP architecture, the module manages 4-20 mA HART loop protocol signals through digitized sampling. To ensure measurement stability, the module performs real-time cold junction compensation (CJC) for temperature-sensitive inputs, maintaining the integrity of the 16-bit A/D conversion cycle. The dual-redundant ESB bus interface ensures continuous data transmission to the controller, preventing signal loss during singular bus fault events.

Frequently Asked Questions

Q: Does this module support hot-swapping during active system operation?

A: Yes. The AAR181-S00 is designed for hot-swap capability, allowing module extraction and replacement while the system bus is energized, provided the slot is within a redundant controller configuration.

Q: How should the module be configured for 4-20 mA versus 0-10 V signals?

A: The input signal type is typically set via the system software configuration at the DCS engineering station; physical wiring must correspond to the specific terminal block assignment for current or voltage inputs.

Q: What is the impact of backplane power consumption on system design?

A: The module draws approximately 400 mA from the 5 V DC backplane supply. System designers must verify the total power budget of the rack to avoid exceeding power distribution unit limits when populating high-density modules.

Field Installation Guidelines

Mounting: Align the module with the cabinet rack rails and ensure the top and bottom locking levers are fully engaged to guarantee proper backplane connector alignment.
Wiring Practices: Utilize shielded, twisted-pair cabling for all analog inputs. Terminate shields at the cabinet-level grounding rail only; avoid multiple-point grounding to prevent ground loop currents that could introduce measurement offsets.
Electrical Safety: Maintain a minimum distance of 150 mm from high-voltage power cabling to avoid electromagnetic interference (EMI) coupling into the high-impedance input circuits.
Environmental: Ensure the enclosure provides forced-air ventilation or passive cooling to maintain ambient air temperatures within the specified -10 deg C to +55 deg C range.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.