F3XD16-3F YOKOGAWA Digital Input Module

YOKOGAWA F3XD16-3F FA-M3 Series Digital Input Module

YOKOGAWA F3XD16-3F FA-M3 Series Digital Input Module

Disponibilidad: 10 Quedan en stock

YOKOGAWA F3XD16-3F Digital Input Module Configured for discrete signal acquisition in FA-M3 PLC platforms, the YOKOGAWA F3XD16-3F (F3XD16-3F Digital Input...

Código: F3XD16-3F

Manufacturer: Yokogawa
Product No.: F3XD16-3F
Product Type: Digital Input Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 160g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

YOKOGAWA F3XD16-3F Digital Input Module

Configured for discrete signal acquisition in FA-M3 PLC platforms, the YOKOGAWA F3XD16-3F (F3XD16-3F Digital Input Module) provides direct physical/electrical execution of 16-channel 24 V DC signal monitoring.

Suffix Breakdown & Model Matrix

F3XD16: Base model identifier for 16-point digital input functionality.
-3F: Version suffix indicating specific hardware revision, terminal configuration, and backplane bus compatibility standards for the FA-M3 series.

Hardware Specifications

Parameter	Specification
Model	F3XD16-3F
Brand	YOKOGAWA
Origin	Japan
Weight	0.16 kg
Dimensions	120 × 90 × 40 mm
Operating Temp	0 deg C to +55 deg C
Power Consumption	5 V DC, 65 mA
Input Channels	16 (Sink/Source)
Rated Voltage	24 V DC
Rated Current	4.1 mA / point
Response Time	5, 15, 25, or 40 ms

PLC Control & Deterministic Network Attributes

The F3XD16-3F utilizes high-speed photocoupler isolation to interface between field-level 24 V DC signals and the FA-M3 backplane logic. The module supports deterministic network timing, with configurable input filtering (5 ms to 40 ms) to suppress contact bounce and electromagnetic transients on field lines. To ensure firmware flash compatibility and synchronization with the CPU module, the device implements backplane bus communication velocity management. The module's I/O density scaling allows it to operate efficiently within high-density control racks while maintaining the necessary optical barrier to prevent fault propagation from the field wiring to the controller logic.

Frequently Asked Questions

Q: Does this module support both sinking and sourcing input configurations?

A: Yes, the F3XD16-3F is designed for dual sink/source compatibility, allowing the user to configure the common potential based on the field sensor switching requirements.

Q: Can the input response time be adjusted during runtime?

A: Yes, the input response time is software-configurable per input point, allowing users to tune signal filtering based on the specific mechanical or electrical noise profile of the attached device.

Q: Is this module hot-swappable?

A: No. Power to the FA-M3 base unit must be removed prior to the insertion or extraction of the F3XD16-3F to prevent potential damage to the module's backplane connector pins.

Field Installation Guidelines

Mounting: Secure the module onto the FA-M3 base unit rack. Verify that the unit is firmly locked in place to maintain the ground contact required for electromagnetic immunity.
Wiring: Connect field devices to the 18-point M3.5 terminal block. Use shielded twisted-pair cabling for long runs to mitigate inductive coupling from high-voltage AC lines.
Grounding: Ensure that the PLC chassis ground is connected to a low-impedance earth point. Keep the input circuit return path as short as possible to minimize potential differences.
Isolation: Maintain a minimum clearance of 100 mm between signal wiring and high-current power cables to preserve the effectiveness of the module's internal optical isolation barriers.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.