- +8618030270289
- Ubicación de la tienda
Yokogawa NFAI143-S50 Analog Input Module
The Yokogawa NFAI143-S50, also cataloged as the NFAI143-S50/A4S00 Analog Input Module, operates as a dedicated hardware component for 16-channel analog signal acquisition within FIO and CENTUM VP systems. Configured for high-speed process monitoring, this module executes 16-bit analog-to-digital conversion, providing isolated 4-20 mA current input processing with integrated loop power supply capabilities for both 2-wire and 4-wire field instrumentation.
Suffix Breakdown & Model Matrix
| Model | Description |
|---|---|
| NFAI143 | Base Model: 16-Channel Analog Input Module |
| -S50 | Standard Version: Field I/O (FIO) Subsystem Support |
| /A4S00 | Ordering Option: Standard Terminal Block/Connector Interface |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | NFAI143-S50/A4S00 |
| Brand | Yokogawa |
| Origin | Japan |
| Weight | 0.3 kg |
| Dimensions | 130 mm x 107 mm x 32 mm |
| Operating Temp | -20 deg C to +70 deg C |
| Power Consumption | 230 mA (5 V DC), 540 mA (24 V DC) |
| Channel Capacity | 16 Isolated channels |
| Accuracy | +/- 0.1% of full scale |
Process Control and Signal Integrity
The NFAI143-S50 utilizes channel-to-channel isolation rated at 1500 V AC to prevent ground loops and electrical interference from propagating through the system bus. Each channel provides a dedicated 24-25.5 V DC transmitter power supply, with integrated overcurrent protection set at a 25 mA limit. The module supports HART protocol transparency, facilitating digital diagnostic overlays on analog loops. With a 10 ms data refresh cycle and a 100 ms step response, the module ensures deterministic signal ingestion for real-time control loops and safety instrumented systems.
Frequently Asked Questions
Q: How is the transmitter wiring mode selected for individual channels?
A: The configuration for 2-wire or 4-wire transmitter operation is determined by physical setting pins located on the module interface. Ensure these pins are set correctly before energizing the loop.
Q: Does the module support hot-swapping under load?
A: Yes, the NFAI143-S50 is designed to support hot-swap replacement within the FIO rack. During the swap, the system backplane maintains integrity while the replacement module performs self-initialization.
Q: Is the cold-junction compensation (CJC) relevant to this module?
A: While the documentation notes CJC, this module is specifically optimized for current-loop inputs. CJC functions are primarily utilized in modules intended for thermocouple signal processing.
Field Installation Guidelines
- Mounting and Bonding: Secure the module to the designated FIO backplane. Ensure the rack is effectively bonded to the cabinet earth bus to maintain the 1500 V AC isolation rating against common-mode transients.
- Wiring Practice: Utilize shielded, twisted-pair cables for signal runs. Connect the cable shield to the cabinet grounding bar at the entry point. Avoid running signal lines adjacent to high-voltage AC cables to maintain the 0.1% accuracy threshold.
- Termination: For 2-wire transmitter loops, verify that the module provides the loop power; for 4-wire transmitters, ensure the external power supply polarity matches the module's input requirements to prevent diode-bridge overcurrent trips.
- Thermal Management: Despite the wide operating range, install the module in a location with adequate airflow. Maintain clearances as specified by the system installation manual to ensure consistent performance at the 70 deg C upper thermal limit.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
NFTR8S-10 S2 Yokogawa STARDOM Terminal Block Analog Module
$99.00
$199.00
YOKOGAWA ADV151-E50 S2 32-Channel Digital Input Module
$99.00
$199.00
Yokogawa AFS30D-H4113 Analog Interface Module
$99.00
$199.00
YOKOGAWA S9981DE-01 CENTUM VP Digital Input/Output Modules
$99.00
$199.00
YOKOGAWA S9950DD-01 CENTUM VP Analog Input/Output Modules
$99.00
$199.00
Nido de módulo de E/S analógicas CENTUM CS AMN11 de Yokogawa
$99.00
$199.00
Módulo de entrada analógica Yokogawa S9841DA CENTUM VP
$99.00
$199.00
TERT*A Bloque de terminales de E/S de campo Yokogawa
$99.00
$199.00
Módulo de salida analógica AAI543-S50 Yokogawa CENTUM VP
$99.00
$199.00
Módulo de entrada analógica ANR11D-420 YOKOGAWA CENTUM VP
$99.00
$199.00
Módulo de salida digital YOKOGAWA SDV541-S33 CENTUM VP
$99.00
$199.00
Placa de relé del módulo de entrada digital SARM15A Yokogawa
$99.00
$199.00
Módulo de salida digital de placa terminal Yokogawa SARM55C
$99.00
$199.00
Módulo de salida analógica TMR Trusted T9881 ICS Triplex
$99.00
$199.00
Módulo de salida digital TMR de confianza T3481 ICS Triplex
$99.00
$199.00
Módulo de entrada digital TMR de confianza ICS Triplex T8193
$99.00
$199.00
Módulos de entrada analógica fiables ICS Triplex T8431
$99.00
$199.00
Módulo de salida analógica T9451 de Rockwell ICS Triplex
$99.00
$199.00
Ensamblaje de salida digital segura ICS Triplex T9191
$99.00
$199.00
Translation missing: es.general.search.loading