Bently Nevada 1900/65A 167699-02 General Purpose Equipment Monitor

Disponibilidad: 0 Quedan en stock

The Bently Nevada 1900/65A (167699-02) is a versatile, cost-effective, and configurable equipment monitor designed for the continuous protection and monitoring...

Código: 1900/65A 167699-02

Manufacturer: Bently Nevada
Product No.: 1900/65A 167699-02
Product Type: Equipment Monitor
Product Origin: USA
Payment:T/T, Western Union
Weight: 980g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 1900/65A (167699-02) is a versatile, cost-effective, and configurable equipment monitor designed for the continuous protection and monitoring of balance-of-plant assets. This monitor provides a robust solution for critical and auxiliary equipment, integrating seamlessly into existing control systems.

Features

Four transducer inputs supporting 2- and 3-wire accelerometers, velocity sensors, or proximity sensors.
Four temperature inputs supporting Type E, J, K, and T thermocouples, and 2- or 3-wire RTDs.
Six configurable relay outputs for alarm and status management.
Four 4-20 mA recorder outputs for external data logging.
Dedicated buffered outputs for each transducer input for portable diagnostic analysis.
Supports acceleration enveloping algorithms for enhanced vibration analysis.
Optional remote display/keypad capability for stand-alone operation up to 75 meters away.
Modbus communication support via Ethernet and serial (RS232/485) ports.

Applications

Rotating Machinery Protection: Monitors pumps, motors, fans, blowers, and centrifuges.
Process Industry Monitoring: Suitable for oil and gas, power generation, mining, and cement plant auxiliary equipment.
OEM & Skid-Mounted Units: Ideal for integration into packaged or skid-mounted OEM machinery.
Predictive Maintenance: Enables early detection of wear, misalignment, and imbalance.

Technical Specifications

Product Model	1900/65A 167699-02
Spare Model	172323-01
Weight	0.98 kg
3-wire Voltage Mode	10 kOhm
Bias Voltage	-24 V
Vibration Variables	+/- 1% of full scale range
Bias Filter	0.09 Hz 1-pole low-pass
OK Filter	2.4 kHz 1-pole low-pass

Installation Guidelines

Electrostatic Discharge (ESD): Always use a grounded wrist strap when handling the module to prevent damage to internal circuitry.
Power Down: Ensure the system power is disconnected before installing or removing the module from the rack.
Wiring: Use shielded cables for transducer inputs to minimize EMI interference. Ensure proper grounding of cable shields at the monitor end.
Environment: Install in a clean, dry environment within the specified temperature range. Ensure adequate ventilation around the module for cooling.
Configuration: Use the Bently Nevada 1900 Configuration software to set up transducer types, alarm setpoints, and relay logic prior to full operation.

FAQ

What is the 1900/65A?

The Bently Nevada 1900/65A General Purpose Equipment Monitor is a configurable, cost-effective, stand-alone system for continuous monitoring and protection of balance-of-plant assets, featuring eight input channels, six relays, and Modbus communication.

What equipment can the 1900/65A monitor?

It is designed for balance-of-plant equipment, such as cooling tower fans, pumps, blowers, motors, centrifuges, and small hydro turbines.

Does the 1900/65A support Modbus?

Yes, it supports Modbus communications via Ethernet and an RS232/485 serial port to interface with DCS, PLC, or SCADA systems.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.