GE IC695CRU320 PACSystems RX3i Redundancy CPU Processor

General Electric IC695CRU320 PACSystems RX3i Redundancy CPU Processor Module

Disponibilidad: 7 Quedan en stock

The General Electric IC695CRU320 is a high-performance Redundancy Processor designed for the PACSystems RX3i platform. Engineered for critical industrial applications...

Código: IC3600TUAA1

Manufacturer: General Electric
Product No.: IC3600TUAA1
Product Type: PLC CPU Processor Module
Product Origin: USA
Payment:T/T, Western Union
Weight: 700g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The General Electric IC695CRU320 is a high-performance Redundancy Processor designed for the PACSystems RX3i platform. Engineered for critical industrial applications requiring high availability, this CPU module enables hot-standby configurations to minimize process downtime. In a redundant setup, the module facilitates an automatic, seamless transfer of control from a primary rack to a secondary rack in the event of a detected failure, with a switchover time of one logic scan (minimum 3.133 msec).

Features

Intel Celeron M processor operating at 1 GHz.
Supports redundant or hot-standby system configurations.
Equipped with 64 MB of battery-backed RAM and 64 MB of non-volatile flash memory.
Integrated Error Checking and Correction (ECC) for RAM data integrity.
Two integrated serial communication ports supporting RS232 and RS485 standards.
Occupies two slots in the RX3i chassis.
Dedicated System Fault (Sys Flt) and I/O Force front-facing status LEDs.

Applications

This processor is intended for complex, mission-critical automation environments where controller failure cannot be tolerated. It is widely utilized in large-scale process control, energy management, and manufacturing systems where high availability and rapid fault recovery are essential. The module supports synchronization links (IC695RMX128/228) for high-speed data transfer between redundant controller pairs.

Technical Specifications

Model	IC695CRU320
Processor	Intel Celeron M (1 GHz)
User RAM	64 MB (Battery-backed)
Flash Memory	64 MB (Non-volatile)
Switchover Time	Max 1 logic scan (min 3.133 msec)
Serial Ports	2 (RS232/RS485)
Slot Occupancy	2 Slots
Operating Temp	0 degC to 60 degC
Power Requirements	+3.3 VDC (1.0A), +5 VDC (1.2A)

Installation Guidelines

Ensure the rack is powered down before inserting or removing the CPU module to prevent electrical damage.
The module is rated as open equipment (IP20); installation in a NEMA/UL Type 1 or equivalent protective enclosure is required to prevent ingress of dust, moisture, or contaminants.
Proper grounding practices must be followed to maintain noise immunity and protect the internal circuitry.
Requires an external high-capacity battery (IC693ACC302) for long-term memory retention.
Handle the module using proper ESD precautions to prevent static discharge damage to the internal components.

FAQ

What is the primary function of the IC695CRU320?

It acts as a redundancy processor for PACSystems RX3i systems, providing automatic failover to a standby controller to maintain continuous operation during hardware faults.

What additional hardware is needed for redundancy?

The system requires a Redundant Memory Exchange (RMX) module, such as the IC695RMX128 or IC695RMX228, to synchronize data between the primary and secondary processors.

How is user data protected during power loss?

The module features 64 MB of battery-backed RAM and 64 MB of non-volatile flash memory to ensure that programs and critical data are retained when power is disconnected.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.