ProSoft MVI56E-MNETR Enhanced Modbus TCP/IP Module

ProSoft MVI56E-MNETR Enhanced Network Interface Module

Disponibilidad: 4 Quedan en stock

The ProSoft MVI56E-MNETR is an enhanced Modbus TCP/IP communication module specifically engineered for Rockwell Automation ControlLogix programmable automation controllers. This...

Código: MVI56E-MNETR

Manufacturer: ProSoft
Product No.: MVI56E-MNETR
Product Type: Communication Module
Product Origin: USA
Payment:T/T, Western Union
Weight: 260g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The ProSoft MVI56E-MNETR is an enhanced Modbus TCP/IP communication module specifically engineered for Rockwell Automation ControlLogix programmable automation controllers. This in-chassis solution provides a high-performance gateway for integrating Modbus TCP/IP-compatible devices—such as Modicon PACs, flowmeters, and power monitoring equipment—directly into a ControlLogix environment. The module is optimized for remote rack applications, utilizing a reduced I/O data image size to maintain communication efficiency across ControlNet or EtherNet/IP networks.

Features

In-chassis Modbus TCP/IP gateway for ControlLogix platforms.
Simultaneous support for Client (Master) and Server (Slave) modes.
Optimized for remote rack and redundant processor architectures through reduced I/O data block sizing.
Configuration via ProSoft Configuration Builder (PCB) and Add-On Instructions (AOI) for Studio 5000.
Integrated web server for local diagnostics, firmware updates, and documentation access.
4-character alphanumeric LED display for real-time status and diagnostics.
CompactFlash (CF) card slot for secure storage of configuration files and rapid field replacement.

Applications

Remote I/O & Distributed Control: Efficiently bridges Modbus TCP/IP networks in remote racks without exceeding bandwidth limits on network adapters.
SCADA & DCS Integration: Acts as a data concentrator to link Allen-Bradley systems to legacy SCADA or DCS platforms.
Substation & Power Monitoring: Enables data collection from IEDs, relays, and meters that lack native Rockwell connectivity.
Oil, Gas, & Water Infrastructure: Integrates flow computers, RTUs, and dosing systems into a centralized ControlLogix control scheme.

Technical Specifications

Model	MVI56E-MNETR
Backplane Current (5V DC)	800 mA
Backplane Current (24V DC)	3 mA
Ethernet Interface	1 x RJ45, 10/100 Base-T
Data Memory Mapping	Up to 5,000 16-bit registers
Server Sessions	Up to 20
Operating Temperature	0 degC to 60 degC
Storage Temperature	-40 degC to 85 degC
Humidity	5% to 95% (non-condensing)

Installation Guidelines

Ensure the ControlLogix backplane is powered down before inserting or removing the module.
Mount the module in any available single slot within the ControlLogix chassis.
Use a standard CAT5 Ethernet patch cable for network connections; the port supports Auto MDI-X for both standard and crossover cables.
For initial configuration, connect a PC to the front-facing configuration port using the provided cable.
Ensure the module is not placed behind a Layer 3 switch or router if using the ProSoft Discovery Service, as UDP broadcast messages may be blocked.

FAQ

What is the primary advantage of the MVI56E-MNETR in remote racks?

The MVI56E-MNETR uses a reduced I/O data block size, which significantly lowers the bandwidth consumption on ControlNet or EtherNet/IP backplane connections, preventing network bottlenecks in remote I/O configurations.

How does the CompactFlash card assist in field maintenance?

The CF card acts as a personality module that stores all network and module-specific configurations. In the event of a hardware failure, you can simply move the card to a spare module to restore the system without re-downloading configurations from a PC.

Can this module support redundant processors?

Yes, the module is designed to function within redundant ControlLogix architectures, provided the system is configured to manage the backplane data transfer efficiently.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.