4351A TRICONEX Communication Module

Triconex 4351A TCM Safety Instrumented System Communication Module

Triconex 4351A TCM Safety Instrumented System Communication Module

Disponibilidad: 10 Quedan en stock

TRICONEX 4351A Tricon Communication Module The TRICONEX 4351A, also cataloged as the TRICONEX 4351A Tricon Communication Module, operates as a...

Código: 4351A

Manufacturer: Triconex
Product No.: 4351A
Product Type: Communication Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

TRICONEX 4351A Tricon Communication Module

The TRICONEX 4351A, also cataloged as the TRICONEX 4351A Tricon Communication Module, operates as a dedicated hardware component for executing communication gateway tasks within Tricon v9.6 and later SIS platforms. The module manages data exchanges between Tricon controllers and external architectures including distributed control systems (DCS), human-machine interfaces (HMI), and supervisory control and data acquisition (SCADA) nodes. The unit processes field network packets and formats industrial telemetry across multiple serial and copper/fiber sub-networks.

Hardware Specifications

Parameter	Specification
Model	4351A (Part Numbers: 3000781-001 / 3000787-110)
Brand	TRICONEX (Schneider Electric)
Origin	USA
Weight	2.15-2.22 kg (Gross weight 3.18 kg)
Dimensions	380 mm x 300 mm x 35 mm (Packing size: 48 cm x 45 cm x 6 cm)
Operating Temp	0 deg C to +60 deg C
Power Consumption	Backplane powered via Tricon chassis
Serial Ports	4 x RS-232/RS-485 points (Up to 115.2 Kbps per port)
Network Ports	2 x 10/100 Mbps copper Ethernet RJ-45 paths
Port Isolation	500 VDC galvanic isolation
System Capacity	Up to 4 modules per Tricon system (Occupying 2 logical slots)
Protocols Supported	TriStation, Modbus (RTU/ASCII/TCP), TSAA, Peer-to-Peer, SNTP, Jet
Safety Certification	IEC 61508 SIL3, TÜV, CE, UL Class I Div 2, ATEX Zone 2

Triple Modular Redundancy & Serial Suppression

The communication hardware interfaces directly with the main Triple Modular Redundancy (TMR) controller processors through isolated internal bus lanes. To protect the inner logic from external electrical surges, the module provides 500 VDC galvanic isolation across all physical network interface boundaries. The four serial ports maintain independent signal tracks to implement strict cross-talk suppression during simultaneous multi-protocol exchanges at 115.2 Kbps. If an external communications port encounters electrical damage or packet buffer corruption, internal diagnostics isolate that port to prevent the problem from moving downstream, keeping the remaining redundant paths operational and protecting the safety instrumented logic.

Frequently Asked Questions

Q: What are the primary rules for establishing communication redundancy using this module?

A: High availability configurations require installing dual modules into the designated communication slots. The Tricon backplane treats these units as an active redundant pair, enabling automatic failover of Modbus and TriStation connections if one module encounters an internal hardware or port failure.

Q: How is the module address mapped when executing Modbus RTU or Modbus TCP communication?

A: Modbus communication requires configuring explicit alias mapping parameters within the TriStation 1131 software utility. Variables from the main processor safety applications must be assigned to valid Modbus addresses before external SCADA or DCS masters can access the data through the physical ports.

Field Installation Guidelines

Chassis Slot Placement: Install the module exclusively into the designated communication slots of the Tricon main or expansion chassis. Do not force the module into standard I/O slots to avoid damaging the backplane connector pins.
Network Cable Routing: Route all Ethernet copper and serial communication cables away from high-voltage motor control wires and AC power lines to limit electromagnetic interference and protect the 500 VDC isolation boundaries.
Firmware and Software Baseline: Verify that the module firmware version matches the exact baseline of the Tricon main processors. The communication module will not initialize if it detects a firmware conflict with the host controllers.
Shield Grounding for Serial Links: Connect the outer shields of all RS-232 and RS-485 cables to the designated instrument ground at the Tricon panel side only, ensuring the field side remains isolated to prevent signal-degrading ground loops.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.