VP6CCM-C11 Yokogawa CENTUM VP Datasheet & Technical Manual

Yokogawa VP6CCM-C11 Communication Control Module Vnet/IP DCS

Yokogawa VP6CCM-C11 Communication Control Module Vnet/IP DCS

Disponibilidad: 10 Quedan en stock

Yokogawa VP6CCM-C11 Communication Control Module The Yokogawa VP6CCM-C11, also cataloged as the VP6CCM-C11 Communication Control Module, operates as a dedicated...

Código: VP6CCM-C11

Manufacturer: Yokogawa
Product No.: VP6CCM-C11
Product Type: Yokogawa Vnet/IP
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 400g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Yokogawa VP6CCM-C11 Communication Control Module

The Yokogawa VP6CCM-C11, also cataloged as the VP6CCM-C11 Communication Control Module, operates as a dedicated hardware component for deterministic Vnet/IP data exchange within CENTUM VP control platforms. Configured for industrial automation networks, this module provides the logical interface between field controllers, engineering stations, and operator consoles, utilizing a redundant architecture to manage real-time packet scheduling and network traffic across star topologies.

Hardware Specifications

Parameter	Specification
Model	VP6CCM-C11
Brand	Yokogawa
Origin	Japan
Weight	0.4 kg
Dimensions	130 mm x 140 mm x 32 mm
Operating Temp	0 deg C to +55 deg C
Power Consumption	5-8 W
Communication	Vnet/IP (Deterministic)

Process Control and DCS Signal Integrity

The VP6CCM-C11 facilitates high-speed, fault-tolerant communication by enforcing deterministic scheduling protocols that minimize network latency to below 1 ms. It incorporates dual redundant RJ-45 Ethernet ports, enabling a dual-network path architecture that ensures uninterrupted data flow even during a physical link failure. The module performs continuous self-diagnostics, monitoring link health, redundancy status, and packet-level error rates to report health data to the system engineering tools. To maintain signal integrity in dense industrial environments, the unit enforces channel-to-channel and system isolation, effectively mitigating the influence of electromagnetic interference on control traffic.

Frequently Asked Questions

Q: Does the module support PROFINET protocols in addition to Vnet/IP?

A: The VP6CCM-C11 is specifically engineered for the deterministic Vnet/IP protocol used in CENTUM VP systems. While some Yokogawa I/O modules support PROFINET, the VP6CCM-C11 functions as a dedicated network communication processor within the controller rack.

Q: Is the module capable of hot-swapping while the redundant network is active?

A: Yes, the module supports hot-swap replacement within the FCS baseplate. The system automatically initializes the replacement module upon insertion and synchronizes its network state with the redundant partner.

Q: How is the physical redundancy of the star topology maintained?

A: Redundancy is maintained by connecting the two Ethernet ports to separate physical network switches. If one path fails, the module’s firmware detects the loss of heartbeat and switches all traffic to the alternate port without interrupting the control scan cycle.

Field Installation Guidelines

Mounting and Bonding: Install the module into a compatible FCS baseplate. Ensure the mounting fasteners are securely tightened to maintain the required mechanical chassis ground, which is essential for preserving the module's electromagnetic compatibility and noise immunity.
Cabling Practices: Use high-quality shielded Cat6 Ethernet cabling. Route communication cables through designated data conduits, ensuring separation from high-power AC lines or motor drive cabling to maintain the integrity of the 100 Mbps data stream.
Redundancy Path Integrity: Verify that both redundant network paths are routed through distinct physical channels within the cabinet. This prevents a single physical event, such as cable pinch or duct failure, from compromising both redundant network interfaces simultaneously.
Thermal Management: Maintain a 50 mm clearance around the module to facilitate convective cooling. Avoid operation in environments where the ambient temperature exceeds 55 deg C to ensure the longevity of the integrated packet-processing components.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.