330104-00-07-50-02-00 Bently Nevada Proximity Probe

330104-00-07-50-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe

330104-00-07-50-02-00 Bently Nevada 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-07-50-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for mechanical displacement...

Código: 330104-00-07-50-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-07-50-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-07-50-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for mechanical displacement tracking within 3300 XL Machinery Protection System platforms. The probe translates the physical gap between its tip and a target surface into a proportional radio frequency signal, transmitting the raw voltage variations across its internal coaxial infrastructure to an external Proximitor module.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe, 3/8-24 UNF thread
00	Unthreaded Length	0 mm
07	Overall Case Length	70 mm
50	Total Length	5.0 meters (16.4 feet)
02	Connector and Cable Type	Miniature coaxial ClickLoc connector, standard cable
00	Agency Approval	Not required

Hardware Specifications

Parameter	Specification
Model	330104-00-07-50-02-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Diameter	8 mm
Thread Type	3/8-24 UNF
System Total Calibration Length	5.0 meters
Operating Temp	-51 to +177 deg C
Power Consumption	Passive transducer component (energized via external Proximitor loop)
Dimensions	70 mm case length, 5.0 meters total extension length
Weight	Less than 1.0 kg nominal

Gap Voltage Validation (-10 VDC Targets)

Field calibration requires strict verification of gap voltage validation to guarantee linear data acquisition over the sensor's measurement envelope. During technical installation, the mechanical depth of the 330104 probe within its threaded housing must be incrementally altered while evaluating the DC bias voltage at the monitoring interface. Securing a base target position matching a -10 VDC output fixes the component at the physical center of its calibrated range, which optimizes noise rejection, controls unintended channel-to-channel cross-talk suppression, and provides clear tracking of high-frequency rotor dynamics.

Frequently Asked Questions

Q: Can this 5.0-meter probe assembly be modified by adding a separate 4.0-meter extension cable?

A: No. The internal electrical impedance tuning matches a fixed 5.0-meter total loop. Attaching an intermediate extension cable to this specific 5.0-meter probe model will unbalance the circuit and cause false vibration readouts.

Q: What are the limits regarding connector handling for the ClickLoc mechanism?

A: The ClickLoc miniature coaxial connector is designed for hand-tight connection only. Using mechanical pliers or wire tools to tighten the knurled sleeve can crush the internal dielectric core and short the active signal path.

Field Installation Guidelines

Mechanical Torque Thresholds: Thread the probe body into its mounting port manually, and secure the locknut using a maximum torque limit of 33.9 N-m (300 in-lb) to prevent housing deformation.
Coaxial Minimum Bend Constraints: Route the 5.0-meter standard integrated lead clear of rotating parts, ensuring all installation pathways preserve a minimum mechanical bend radius of 25.4 mm (1.0 inch).
Isolation and Shield Isolation: The ClickLoc junction must remain electrically isolated from surrounding steel structures. Grounding loops are mitigated by keeping the terminal connection insulated from the machine casing ground.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.