330104-00-13-10-02-00 Bently Nevada Proximity Probe

330104-00-13-10-02-00 | Bently Nevada | 3300 XL 8 mm Proximity Probe

330104-00-13-10-02-00 | Bently Nevada | 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-13-10-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for non-contacting shaft...

Código: 330104-00-13-10-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-13-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-13-10-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for non-contacting shaft displacement tracking within 3300 XL Machinery Protection System platforms. The probe introduces a high-frequency eddy-current field onto a moving conductive shaft target to capture mechanical changes, transferring raw gap impedance modulations over an integrated coaxial transmission line to an external matching Proximitor module.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe, M10 x 1 Thread
00	Unthreaded Length	0 mm
13	Overall Case Length	130 mm
10	Total Length	1.0 meter (3.3 feet)
02	Connector and Cable Type	Miniature coaxial ClickLoc connector with standard cable
00	Agency Approval	No agency approval required

Hardware Specifications

Parameter	Specification
Model	330104-00-13-10-02-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Diameter	8 mm
Linear Range	2.0 mm (80 mils)
Scale Factor	7.87 V/mm (200 mV/mil) nominal
Operating Temp	-51 to +177 deg C
Power Consumption	Passive sensor assembly (excited by external Proximitor loop)
Dimensions	130 mm case length, 1.0 meter total cable length
Weight	Less than 1.0 kg nominal

Gap Voltage Validation (-10 VDC Targets)

Field deployment requires systematic gap voltage validation to anchor the probe within its calibrated linear measurement envelope. During the physical threading process, engineers must adjust the mechanical insertion depth of the 130 mm case relative to the target surface while tracing the electrical output. Aligning the sensor tip to achieve a baseline output of exactly -10 VDC establishes the physical center of the linear calibration span, optimizing signal accuracy for monitoring raw rotor dynamics and enforcing cross-talk suppression against adjacent active measurement channels.

Frequently Asked Questions

Q: Can this 1.0-meter total length probe assembly be connected directly to a standard 5.0-meter Proximitor Sensor?

A: No. Transducer loops require an exact electrical length match. This 1.0-meter probe must be paired with a matching 4.0-meter extension cable to complete the necessary 5.0-meter total system length required by the Proximitor module.

Q: Is this model an extension cable or a proximity probe sensor?

A: This model number represents the integrated proximity probe sensor assembly (including the tip, threaded case, and 1.0-meter integral cable), not a standalone extension cable. It interfaces with an external 3300 XL extension cable to reach the Proximitor.

Field Installation Guidelines

Mounting Thread Torque Limits: When inserting the 130 mm metric case into the machine port, limit mechanical torque on the M10 x 1 thread to 33.9 N-m (300 in-lb) to avoid casing fracture or deformation.
Coaxial Core Protection: Route the 1.0-meter standard integrated lead path with a minimum mechanical bend radius of 25.4 mm (1.0 inch) to preserve internal copper insulation layers.
Electrical Ground Segregation: Ensure that the outer conductor sleeve of the ClickLoc miniature coaxial connector joint remains completely isolated from the machine casing ground to block potential ground loops.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.