330130-045-00-05 Bently Nevada Extension Cable

330130-045-00-05 Bently Nevada 3300 XL Series Extension Cable

330130-045-00-05 Bently Nevada 3300 XL Series Extension Cable

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330130-045-00-05, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal...

Código: 330130-045-00-05

Manufacturer: Bently Nevada
Product No.: 330130-045-00-05
Product Type: Proximity Sensor Cables
Product Origin: USA
Payment:T/T, Western Union
Weight: 230g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330130-045-00-05, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal transmission within 3300 XL Proximitor Sensor networks. It acts as the electrical interface linking a proximity probe to a remote transducer module, transferring raw high-frequency displacement signals back to the monitoring system chassis without inducing uncompensated loop impedance shifts or phase errors.

Suffix Breakdown & Model Matrix

330130 - Base Model: 3300 XL Standard Extension Cable
-045 - Cable Length Option: 4.5 metres (14.8 feet)
-00 - Connector Protector and Cable Option: Standard cable (non-armored)
-05 - Agency Approval Option: Multiple Approvals (ATEX, IECEx, CSA, etc. for hazardous locations)

Hardware Specifications

Parameter	Specification
Model	330130-045-00-05
Brand	Bently Nevada
Origin	United States
Weight	0.23 kg nominal
Dimensions	4.5 m physical length (75 ohm coaxial geometry)
Operating Temp	-51 to +177 deg C
Power Consumption	0.0 W (Passive component)
System Calibration	3300 XL 5 mm and 8 mm Transducer Systems
Nominal Capacitance	69.9 pF/m (21.3 pF/ft)
Minimum Bend Radius	25.4 mm (1.0 in)

Eddy-Current Signal Shielding & Cross-Talk Suppression

The 330130-045-00-05 coaxial structure provides cross-talk suppression and maintains strict calibration constants for eddy-current probe scaling. By securing continuous shielding over the 4.5 m path, the cable protects the low-voltage dynamic signals from electromagnetic noise generated by nearby machine drivers. This stability supports accurate gap voltage validation targeting nominal -10 VDC levels, protecting the linearity of the static and dynamic data passed to the continuous monitoring hardware.

Frequently Asked Questions

Q: Can this standard non-armored extension cable be cut or spliced in the field to match short routing runs?

A: No. Altering the physical length of the cable modifies its internal capacitance and inductance parameters. Splicing introduces impedance anomalies that degrade the linear scale factor of the 3300 XL system, invalidating machinery displacement measurements.

Q: How does the "Multiple Approvals" (-05 suffix) impact the hardware configuration compared to the base version?

A: The physical dimensions and electrical properties remain identical. The -05 designation verifies that the cable has undergone testing and marking to comply with specific intrinsic safety parameters when connected to certified barrier devices in classified hazardous zones.

Field Installation Guidelines

Maintain the standard minimum bend radius of 25.4 mm during cable tray layout execution to avoid dielectric deformation.
Ensure all terminal connections are torqued according to manufacturer specifications to avoid loose contacts that shift baseline loop resistance.
Ground the outer shield solely at the designated Proximitor sensor terminal block to prevent the creation of parasitic ground loops.
Isolate coaxial connectors from structural metal conduits by using the integrated insulation sleeves or external self-fusing tape.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.