330130-045-01-05 Bently Nevada Extension Cable

330130-045-01-05 3300 XL Series Extension Cable | Bently Nevada

330130-045-01-05 3300 XL Series Extension Cable | Bently Nevada

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330130-045-01-05, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal...

Código: 330130-045-01-05

Manufacturer: Bently Nevada
Product No.: 330130-045-01-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330130-045-01-05, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal transmission within 3300 XL Proximitor Sensor networks. It acts as the electrical link connecting an 8 mm or 5 mm proximity probe to a remote transducer module, maintaining analog proximity loop integrity without introducing uncompensated impedance mismatches or signal phase errors.

Suffix Breakdown & Model Matrix

330130 - Base Model: 3300 XL Standard Extension Cable
-045 - Cable Length Option: 4.5 metres (14.8 feet)
-01 - Connector Protector and Cable Option: Armored cable
-05 - Agency Approval Option: CSA, ATEX, IECEx Approvals

Hardware Specifications

Parameter	Specification
Model	330130-045-01-05
Brand	Bently Nevada
Origin	United States
Weight	2.0 kg
Dimensions	4.5 m physical length (armored jacket diameter 5.89 mm)
Operating Temp	-51 to +177 deg C
Power Consumption	0.0 W (Passive component)
Transducer System Matching	3300 XL 5 mm and 8 mm Proximity Transducers
Nominal Capacitance	69.9 pF/m (21.3 pF/ft)
Minimum Bend Radius	25.4 mm (1.0 in)

Eddy-Current Probe Scaling & Cross-Talk Suppression

The 330130-045-01-05 utilizes a specialized armored coaxial infrastructure to provide signal integrity and cross-talk suppression during parallel routing configurations. The tight manufacturing tolerances of the internal core establish standard eddy-current probe scaling coefficients required by 3300 XL monitoring systems. This structural optimization ensures correct loop attenuation behavior, facilitating precise gap voltage validation targeting standard -10 VDC operational baselines.

Frequently Asked Questions

Q: How does the internal capacitance shift if the outer armored jacket experiences structural deformation or crushing?

A: Mechanical deformation of the outer armor layer modifies the distance between the primary internal conductor and the copper braid shielding. This structural change alters the nominal 69.9 pF/m baseline capacitance parameter, resulting in non-linear scale factor errors in the vibration tracking circuit.

Q: Does the -05 multiple approval suffix change the physical grounding or electrical connection scheme of the coaxial shield?

A: No. The -05 designation dictates compliance with intrinsic safety parameters for hazardous locations (CSA, ATEX, IECEx) but does not change the physical structure of the coaxial cable. Shielding connection and insulation requirements remain identical to standard variants.

Field Installation Guidelines

Maintain a minimum static bend radius of 25.4 mm along the entirety of the conduit run to prevent dielectric material deformation.
Ensure all terminal connections are joined utilizing the standard tightening procedures to mitigate impedance spikes at junction points.
Insulate the coaxial connector assemblies from direct physical contact with structural cable trays using the specified terminal boots or self-fusing insulation wrap.
Isolate all sensor runs inside dedicated low-voltage instrument raceways to optimize cross-talk suppression and eliminate EMI hazards.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.