330130-080-00-05 Bently Nevada Extension Cable

330130-080-00-05 3300 XL Series Extension Cable | Bently Nevada

330130-080-00-05 3300 XL Series Extension Cable | Bently Nevada

Disponibilidad: 10 Quedan en stock

Configured for RF signal transmission in 3300 XL Proximitor Sensor networks, the Bently Nevada 330130-080-00-05 (330130 Extension Cable) provides direct...

Código: 330130-080-00-05

Manufacturer: Bently Nevada
Product No.: 330130-080-00-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 350g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for RF signal transmission in 3300 XL Proximitor Sensor networks, the Bently Nevada 330130-080-00-05 (330130 Extension Cable) provides direct physical/electrical execution. It serves as the calibrated passive connection linking an eddy-current proximity probe to a remote Proximitor sensor, facilitating continuous analog measurement loops without introducing impedance discontinuities.

Suffix Breakdown & Model Matrix

330130 - Base Model: 3300 XL Standard Extension Cable
-080 - Cable Length Option: 8.0 metres (26.2 feet)
-00 - Connector Protector and Cable Option: Standard Cable
-05 - Agency Approval Option: Multiple Approvals (including ATEX, IECEx, and CSA hazardous area certifications)

Hardware Specifications

Parameter	Specification
Model	330130-080-00-05
Brand	Bently Nevada
Origin	United States
Weight	0.35 kg nominal
Dimensions	8.0 m nominal cable length (75 ohm coaxial topology)
Operating Temp	-51 to +177 deg C
Power Consumption	0.0 W (Passive module)
Nominal Capacitance	69.9 pF/m (21.3 pF/ft)
Minimum Bend Radius	25.4 mm (1.0 in)
System Compatibility	3300 XL 5 mm and 8 mm Proximity Transducers

Eddy-Current Probe Scaling & Gap Voltage Validation

The physical geometry and materials of the 330130-080-00-05 extension cable are specifically engineered to maintain precise electrical parameters required for proper eddy-current probe scaling. This control over coaxial circuit capacitance and inductance prevents signal degradation across the 8.0 m path. Consequently, the transducer loop can perform accurate gap voltage validation targeting nominal -10 VDC levels, which is required to capture reliable vibration and position data across machinery rotor dynamics profiles.

Frequently Asked Questions

Q: How does the choice of an 8.0 m extension cable affect overall sensor loop matching?

A: Proximitor systems are calibrated for fixed total electrical lengths, typically 5.0 m or 9.0 m. An 8.0 m extension cable must be matched with a 1.0 m proximity probe to meet the total 9.0 m design parameter; mixing mismatched lengths disrupts the linear scale factor.

Q: Can this cable be altered or cut to fit constrained field enclosures?

A: No. Altering the physical length changes the cumulative capacitance and electrical length of the coaxial line. Trimming will void the factory calibration and cause systemic measurement errors in the displacement loop.

Field Installation Guidelines

Ensure the total electrical length of the probe and extension cable correctly matches the specific system configuration requirements marked on the Proximitor sensor housing.
Observe the minimum static bend radius limitation of 25.4 mm during cable installation to prevent mechanical kinking or damage to the internal dielectric core.
Adequately insulate and isolate all subminiature coaxial connectors using proper terminal boots or self-fusing tape to prevent ground loops caused by structural contact.
Route the non-armored cable through grounded protective conduits to minimize external electrical noise and cross-talk interference from high-voltage machinery wiring.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.