330130-085-00-00 Bently Nevada Series Datasheet & Technical Manual

330130-085-00-00 3300 XL Series Extension Cable | Bently Nevada

330130-085-00-00 3300 XL Series Extension Cable | Bently Nevada

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330130-085-00-00 serves as the primary 330130 Extension Cable utilized to execute RF signal transmission across 3300 XL...

Código: 330130-085-00-00

Manufacturer: Bently Nevada
Product No.: 330130-085-00-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330130-085-00-00 serves as the primary 330130 Extension Cable utilized to execute RF signal transmission across 3300 XL Transducer System platforms. This passive electrical component establishes the low-attenuation path required to bridge an 8 mm proximity probe tip with a processing Proximitor sensor, running high-frequency analog signals without modifying structural loop capacitance boundaries.

Suffix Breakdown & Model Matrix

330130 - Base Model: 3300 XL Standard Extension Cable
-085 - Cable Length Option: 8.5 metres (27.9 feet)
-00 - Connector Protector and Cable Option: Standard cable without connector protectors
-00 - Agency Approval Option: Not required

Hardware Specifications

Parameter	Specification
Model	330130-085-00-00
Brand	Bently Nevada
Origin	United States
Weight	0.289 kg net mass (2.0 kg gross shipping weight rating)
Dimensions	8.5 m nominal cable length; 3.68 mm maximum outside diameter
Operating Temp	-51 to +177 deg C
Power Consumption	0.0 W (Passive hardware line)
Nominal Impedance	75 ohm coaxial geometry
Capacitance	69.9 pF/m nominal matching electrical value
Transducer Compatibility	3300 XL 8 mm proximity probe and sensor networks

Eddy-Current Probe Scaling & Cross-Talk Suppression

The internal 75 ohm coaxial architecture of the 330130-085-00-00 extension cable provides precise electrical matching parameters optimized for factory eddy-current probe scaling. The uniform internal capacitance profile prevents signal attenuation across the 8.5 metres segment, securing optimal cross-talk suppression when routed alongside adjacent instrumentation wiring. This controlled signal transmission allows stable gap voltage validation targeting nominal -10 VDC baselines, guaranteeing clean data conversion for monitoring dynamic rotor dynamics.

Frequently Asked Questions

Q: Why is maintaining the exact 8.5 metres physical length necessary for this circuit configuration?

A: The paired Proximitor sensor is calibrated to drive a fixed total electrical length (such as a 9.0 metres total system loop). Shortening or lengthening the cable alters circuit capacitance, shifts the scale factor calibration, and corrupts displacement metrics.

Q: Does the standard cable layout under option -00 provide protection against environmental fluid migration?

A: Option -00 specifies a standard coaxial jacket structure without fluid barriers or mechanical armoring. For conditions involving liquid submersions or high moisture levels, FluidLoc modified options must be designated.

Field Installation Guidelines

Verify that this 8.5 metres extension cable is combined strictly with a 0.5 metre proximity probe to satisfy the 9.0 metres total system parameter required by the matched Proximitor sensor.
Do not subject the coaxial run to tight physical routings that fall below the minimum static bend radius threshold of 25.4 mm to prevent shifting internal dielectric spacing.
Apply appropriate insulation tape or external shielding boots over the miniature coaxial connections since this version excludes integrated mechanical connector protectors.
Install the low-voltage analog cable inside distinct, grounded metal conduit paths isolated from parallel high-power AC distribution lines to minimize signal interference.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.