330930-045-03-CN Bently Nevada 3300 NSv Datasheet & Technical Manual

330930-045-03-CN Bently Nevada 3300 NSv Extension Cable

330930-045-03-CN Bently Nevada 3300 NSv Extension Cable

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330930-045-03-CN serves as the primary 3300 NSv Extension Cable utilized to execute high-frequency signal transmission between proximity...

Código: 330930-045-03-CN

Manufacturer: Bently Nevada
Product No.: 330930-045-03-CN
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330930-045-03-CN serves as the primary 3300 NSv Extension Cable utilized to execute high-frequency signal transmission between proximity probes and Proximitor sensors across 3300 NSv Proximity Transducer System platforms.

Suffix Breakdown & Model Matrix

The catalog suffix breakdown for part number 330930-045-03-CN is defined as follows:

330930: Base Model for 3300 NSv Extension Cable
045: Cable Length Option - 4.5 meters (14.8 feet)
03: Connector and Cable Option - Without stainless steel armor, with connector protectors
CN: Agency Approval Option - Country-specific approval (China)

Hardware Specifications

Parameter	Specification
Model	330930-045-03-CN
Brand	Bently Nevada
Origin	USA
Weight	1.5 kg (Shipping weight)
Dimensions	4.5 meters (14.8 feet) length
Operating Temp	-51 to 177 deg C (-60 to 350 deg F)
Power Consumption	Passive physical conductor (zero power dissipation)
Material	75 ohm coaxial, fluoroethylene propylene (FEP) insulated
Center Conductor Resistance	0.220 ohm/m (0.067 ohm/ft)
Shield Resistance	0.066 ohm/m (0.020 ohm/ft)
Extension Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical
Armor / Connector Option	Option 03 (Without stainless steel armor, with connector protectors)
Agency Approval	Option CN (China specific approval)

Rotor Dynamics & Gap Voltage Validation

The 3300 NSv extension cable delivers raw radio-frequency signals across its 75 ohm coaxial conductor structure to preserve precise loop tuning in compact machinery installations. Maintaining nominal capacitance (69.9 pF/m typical) is required for accurate eddy-current probe scaling and rotor dynamics monitoring. Field commissioning protocols require performing gap voltage validation at the Proximitor output terminals, adjusting physical probe position until achieving a baseline target of -10 VDC under non-rotating shaft conditions before dynamic signal processing.

Frequently Asked Questions

Q: What functionality do the connector protectors in Option 03 provide?

A: Option 03 includes elastomeric connector protectors that cover the ClickLoc coaxial junctions, preventing moisture, dust, and oil ingress at the probe-to-extension cable interface.

Q: Why is it critical to preserve the exact 4.5-meter physical length of the extension cable?

A: The total electrical capacitance of the 3300 NSv transducer system is calibrated to specific cable length combinations. Cutting, splicing, or changing the cable length degrades measurement linearity and sensitivity.

Field Installation Guidelines

Conduit Placement: Lay the unarmored FEP insulated coaxial cable inside metal conduit or dedicated instrument trays, isolating it from high-voltage AC lines.
Connector Protection: Slide the supplied connector protectors over the ClickLoc coaxial terminals prior to mating, ensuring a tight seal against ambient environmental contaminants.
Minimum Bend Radius: Maintain standard coaxial bend radius limits during installation to prevent deformation of the FEP dielectric core and shield integrity.
Shield Grounding: Verify overall shield continuity along the 4.5-meter run, maintaining single-point termination at the monitoring cabinet ground bar to mitigate ground loop currents.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.