330930-060-00-05 Bently Nevada 3300 XL Datasheet & Technical Manual

330930-060-00-05 Bently Nevada 3300 XL Standard Extension Cable

330930-060-00-05 Bently Nevada 3300 XL Standard Extension Cable

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330930-060-00-05, also cataloged as the 3300 XL Standard Extension Cable, operates as a dedicated hardware component for...

Código: 330930-060-00-05

Manufacturer: Bently Nevada
Product No.: 330930-060-00-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330930-060-00-05, also cataloged as the 3300 XL Standard Extension Cable, operates as a dedicated hardware component for high-frequency signal transmission between proximity probes and Proximitor sensors within 3300 XL Transducer System networks.

Suffix Breakdown & Model Matrix

The suffix breakdown for part number 330930-060-00-05 is structured as follows:

330930: Base Model designation for 3300 XL Standard Extension Cable
060: Cable Length Option - 6.0 meters (19.7 feet)
00: Connector and Cable Option - Standard cable without stainless steel armor
05: Agency Approval Option - Multiple approvals (CSA, ATEX, IECEx)

Hardware Specifications

Parameter	Specification
Model	330930-060-00-05
Brand	Bently Nevada
Origin	USA
Weight	0.27 kg (Net), 1.5 kg (Shipping)
Dimensions	6.0 meters (19.7 feet) physical length
Operating Temp	-51 to 177 deg C (-60 to 350 deg F)
Power Consumption	Passive physical conductor (zero power dissipation)
Unit Cable Mass	0.045 kg/m
Armoring Option	Option 00 (Without stainless steel armor)
Agency Approval	Option 05 (Multiple Approvals)

Rotor Dynamics & Gap Voltage Validation

The 3300 XL extension cable transmits raw high-frequency radio-frequency signals across its coaxial structure to maintain matched impedance and loop capacitance. Preserving exact total system cable length is necessary for accurate eddy-current probe scaling and rotor dynamics monitoring. Field commissioning requires executing gap voltage validation across the Proximitor output terminals, adjusting physical probe standoff distance until establishing a nominal baseline target of -10 VDC under non-rotating shaft conditions.

Frequently Asked Questions

Q: How does installing an incorrect cable length affect the Proximitor calibration?

A: The Proximitor sensor is calibrated to the combined capacitance of a specific total loop length. Using an unapproved cable length shifts system electrical tuning, degrading overall linear measurement accuracy.

Q: What precautions should be observed for unarmored extension cable installations?

A: Unarmored (Option 00) cables must be routed inside metal conduits or covered cable trays to protect the outer insulation against sharp bends, pinching, and mechanical impact.

Field Installation Guidelines

Conduit Separation: Route the extension cable through grounded metallic conduit, keeping physical separation from AC motor cables to suppress induced electrical noise.
Connector Mating: Inspect miniature coaxial ClickLoc connectors prior to mating. Align keyways, push, and twist until fully seated to establish positive mechanical latching.
Minimum Bend Radius: Respect minimum allowable bend radius limits during installation to prevent deformation of the coaxial dielectric layer.
Shield Isolation: Maintain overall cable shielding continuity along the run, ensuring single-point termination at the monitoring cabinet ground bar to mitigate ground loop currents.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.