330103-00-15-10-02-00 Bently Nevada Proximity Probe Datasheet & Technical Manual

Bently Nevada 330103-00-15-10-02-00 3300 XL Proximity Probe

Bently Nevada 330103-00-15-10-02-00 3300 XL Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330103-00-15-10-02-00, also cataloged as the 330103 Proximity Probe, operates as a dedicated hardware component for proximity and...

Código: 330103-00-15-10-02-00

Manufacturer: Bently Nevada
Product No.: 330103-00-15-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 120g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330103-00-15-10-02-00, also cataloged as the 330103 Proximity Probe, operates as a dedicated hardware component for proximity and vibration sensing within 3300 XL machinery monitoring platforms. The hardware executing the physical displacement verification translates mechanical rotor dynamics into proportional voltage deviations via high-frequency eddy-current probe scaling circuits.

Suffix Breakdown & Model Matrix

Suffix Code	Option Description	Technical Parameter
330103	Base Model	8 mm Proximity Probe
-00	Unthreaded Length Option	0 mm
-12	Overall Case Length Option	150 mm
-10	Total Length Option	1.0 metre (3.3 feet)
-02	Connector and Cable Type Option	Miniature coaxial ClickLoc connector, standard cable
-00	Agency Approval Option	Not required

Hardware Specifications

Parameter	Specification
Model	330103-00-15-10-02-00
Brand	Bently Nevada
Origin	USA
Weight	0.15 kg nominal
Dimensions	8 mm tip diameter, 150 mm case length
Operating Temp	-51 deg C to +177 deg C
Power Consumption	Driven by Proximitor Sensor (Typically 12 mA at -24 VDC)
Nominal Scale Factor	7.87 V/mm (200 mV/mil) with standard target

Gap Voltage Validation and Rotor Dynamics

Physical implementation of the 8 mm eddy-current probe requires strict gap voltage validation to secure accurate baseline metrics. During mechanical positioning, installers must calibrate the physical distance to achieve a -10 VDC target voltage at the center of the linear calibration spectrum. Maintaining this static electrical offset ensures structural loop response remains constant across sudden rotor dynamics transitions, suppressing peripheral signal clipping during high-vibration operational transients.

Frequently Asked Questions

Q: What technical fault occurs if the physical probe cable is spliced or altered in length?

A: Altering the 1.0 metre cable length modifies total loop capacitance and impedance parameters. This shifts the internal eddy-current probe scaling configurations, introducing critical linearity errors across the monitoring range.

Q: How does cross-talk manifest between multiple 8 mm probes installed in close proximity?

A: When multiple units are mounted below recommended physical clearances, mutual electromagnetic fields overlap. This creates cross-talk modulation, inducing false high-frequency components into the raw vibration monitoring signal.

Field Installation Guidelines

Mount the probe housing into a heavy-duty bracket to isolate the internal assembly from secondary structural resonance. Ensure peripheral clearance rules are satisfied to eliminate unwanted tracking deviations from surrounding conductive structural components. Rotate the probe depth within the mounting port until the dynamic gap voltage registers exactly -10 VDC on a digital voltmeter. Fasten the retention locknuts to nominal torque tolerances to prevent mechanical slipping under high thermal gradient cycles. Secure the miniature coaxial ClickLoc connection interface inside a dedicated conduit box to block moisture entry.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.