330104-00-06-50-01-00 Bently Nevada Proximity Probe

Bently Nevada 330104-00-06-50-01-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-06-50-01-00 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-06-50-01-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for vibration monitoring...

Código: 330104-00-06-50-01-00

Manufacturer: Bently Nevada
Product No.: 330104-00-06-50-01-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-06-50-01-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for vibration monitoring and position measurement tasks within a 3300 XL Proximity Transducer System loop. The component interacts with a moving target surface via high-frequency eddy-current fields, routing physical displacement variations through an integrated coaxial transmission line to an external matching Proximitor Sensor.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe (3/8-24 UNF Thread)
00	Unthreaded Length	0 mm
06	Overall Case Length	60 mm
50	Total Length	5.0 meters (16.4 feet)
01	Connector and Cable Type	Miniature coaxial ClickLoc connector with connector protector, standard cable
00	Agency Approval	Not required

Hardware Specifications

Parameter	Specification
Model	330104-00-06-50-01-00
Brand	Bently Nevada
Origin	U.S.A.
Probe Tip Diameter	8 mm
Thread Type	3/8-24 UNF
Target Material	AISI 4140 steel
Frequency Response	0 to 10 kHz
Linearity	+/-0.5% of full-scale output
Repeatability	+/-0.2% of full-scale output
Accuracy	+/-1% of full-scale output
Operating Temp	-40 to +85 deg C
Power Consumption	Determined by excitation loop (10-32 VDC supply range)
Dimensions	60 mm overall case length, 5.0 meters total length
Weight	Less than 1.0 kg nominal

Gap Voltage Validation (-10 VDC Targets)

To achieve baseline accuracy across the probe linear span, field implementation requires proper gap voltage validation. During mounting, the probe depth within its 3/8-24 UNF threads must be fine-tuned while tracking voltage outputs across the Proximitor loop. Setting a static target gap of approximately 1.27 mm (50 mils) aligns the sensor to its standard operating region, typically tracking a nominal reference of -10 VDC. This strategic positioning establishes the prerequisite conditions for measuring structural rotor dynamics and ensures effective cross-talk suppression between closely situated proximity probe channels.

Frequently Asked Questions

Q: Can this 5.0-meter probe be paired with a standard 4.0-meter extension cable?

A: No. This probe is physically and electrically configured to a 5.0-meter total length. It must connect directly into a 5.0-meter type Proximitor Sensor without an extension cable to avoid severe loop impedance errors.

Q: What environmental defense does the option 01 connector configuration offer?

A: The option 01 configuration provides a miniature coaxial ClickLoc connector coupled with a specialized connector protector. The protector isolates the interface from the ingress of moisture and turbine oil, preventing step changes in signal outputs.

Field Installation Guidelines

Mounting Torque Restrictions: When threading the 3/8-24 UNF probe housing, tighten the assembly into position using a maximum torque value of 33.9 N-m (300 in-lb) to prevent structural compression failures.
Cable Routing Constraints: Maintain a minimum structural bend radius of 25.4 mm (1.0 inch) along the 5.0-meter standard cable to protect the integrity of the internal coaxial shielding layers.
Ground Isolation Protocols: Ensure the outer jacket and the ClickLoc connector joint remain completely isolated from the machine casing ground to avoid electrical loop noise.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.