330104-00-09-05-11-05 Bently Nevada Proximity Probe

Bently Nevada 330104-00-09-05-11-05 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-09-05-11-05 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-09-05-11-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for high-precision vibration...

Código: 330104-00-09-05-11-05

Manufacturer: Bently Nevada
Product No.: 330104-00-09-05-11-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-09-05-11-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for high-precision vibration and position measurement within 3300 XL Machinery Protection System platforms. The probe tip establishes an electromagnetic field to register dynamic shaft displacement, transferring raw gap voltage alterations over a moisture-resistant coaxial transmission line with armor protection back to an external Proximitor Sensor.

Suffix Breakdown & Model Matrix

Code	Option Category	Technical Configuration
330104	Base Model	3300 XL 8 mm Proximity Probe, M10 x 1 Metric Thread
00	Unthreaded Length	0 mm
09	Overall Case Length	90 mm
05	Total Length	0.5 meter (1.6 feet)
11	Connector and Cable Type	Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable
05	Agency Approval	CSA, ATEX, IECEx multiple approvals

Hardware Specifications

Parameter	Specification
Model	330104-00-09-05-11-05
Brand	Bently Nevada
Origin	U.S.A.
Thread Type	M10 x 1
Unthreaded Length	0 mm
Overall Case Length	90 mm
Cable Infrastructure	FluidLoc cable with mechanical armor protection and ClickLoc connector protector
Certification	CSA, ATEX, IECEx
Operating Temp	-51 to +177 deg C
Power Consumption	Passive sensor assembly (excited by external Proximitor loop)
Dimensions	90 mm case length, 0.5 meter total cable length
Weight	Less than 1.0 kg nominal

Cross-Talk Suppression

When deploying multiple 330104-00-09-05-11-05 probe assemblies inside a single machine bearing housing for orthogonal (X-Y) radial vibration tracking, mechanical spacing must enforce cross-talk suppression. If the physical distance between adjacent 8 mm probe tips falls below 40 mm (1.6 inches), the high-frequency electromagnetic fields will intersect, inducing mutual interference and distorting the voltage-to-displacement calibration. Maintaining strict physical clearance ensures that each module executes independent displacement tracking without cross-channel modulation.

Frequently Asked Questions

Q: Can this 0.5-meter probe be directly connected to a standard 5.0-meter Proximitor Sensor?

A: No. Transducer loops require a matched electrical length calibration. A 0.5-meter total length probe must be paired with a 4.5-meter extension cable to complete the necessary 5.0-meter total system length required by the matching Proximitor module.

Q: What specific protection is provided by the combination of a FluidLoc cable and a connector protector?

A: The FluidLoc matrix prevents the internal capillary migration of oil or moisture through the cable jacket if damaged, while the integrated connector protector physically seals the ClickLoc coaxial junction against environmental fluid ingress at the machine boundary.

Field Installation Guidelines

Mounting Torque Limits: When threading the 90 mm metric case into the machine housing, use a calibrated torque wrench to limit mechanical load to a maximum of 33.9 N-m (300 in-lb) to prevent thread binding or casing distortion.
Armor Bend Radius Restrictions: The protective metal armor jacket shields the internal FluidLoc coaxial line but restricts flexibility. Maintain a minimum structural bend radius of 25.4 mm (1.0 inch) during routing to prevent internal conductor fracturing.
Shield Ground Separation: Ensure that the outer metallic structure of the armored cable and the ClickLoc connector protector assembly remains isolated from the machine ground. All signal shields must track back and terminate exclusively at the instrument rack or junction box common ground.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.