330104-00-14-05-02-00 Bently Nevada Proximity Probe

Bently Nevada 330104-00-14-05-02-00 3300 XL 8 mm Proximity Probe

Bently Nevada 330104-00-14-05-02-00 3300 XL 8 mm Proximity Probe

Disponibilidad: 10 Quedan en stock

Configured for non-contacting vibration and displacement measurement in machinery monitoring systems, the Bently Nevada 330104-00-14-05-02-00 (330104 Proximity Probe) provides direct...

Código: 330104-00-14-05-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-14-05-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 323g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for non-contacting vibration and displacement measurement in machinery monitoring systems, the Bently Nevada 330104-00-14-05-02-00 (330104 Proximity Probe) provides direct physical/electrical execution. The component translates the physical gap between the probe tip and the target rotor into a proportional voltage signal when paired with a matching proximitor sensor.

Hardware Specifications

Parameter	Specification
Model	330104-00-14-05-02-00
Brand	Bently Nevada
Origin	U.S.A.
Weight	0.323 kg
Dimensions	M10 x 1 thread, 140 mm overall case length, 0.5 m total length
Operating Temp	-51 deg C to +177 deg C
Power Consumption	Passive component (driven by proximitor sensor)
Thread Configuration	M10 x 1 thread with stainless steel armor
Unthreaded Length	0 mm
Overall Case Length	140 mm
Total Length Option	0.5 meter (1.6 feet)
Connector Type	Miniature coaxial ClickLoc connector, standard cable
Agency Approval	Not required

Machinery Monitoring and TSI Characteristics

This eddy-current probe relies on definitive scaling parameters to maintain loop accuracy. During field commissioning, cross-talk suppression must be enforced by maintaining a minimum physical clearance between adjacent probe tips to prevent radio frequency interference from corrupting the dynamic signals. Field technicians must perform gap voltage validation to verify that the physical position corresponds to the linear center of the calibration curve. The probe output drives the transducer loop to target an initial bias voltage of -10 VDC, ensuring optimal linear range capture for structural tracking and rotor dynamics analysis under fluctuating thermal profiles.

Frequently Asked Questions

Q: How should the ClickLoc connector be handled to prevent signal loss?

A: The ClickLoc coaxial connector requires a dry, contamination-free connection. Do not use tools to over-tighten the connection; finger-tighten past the initial click detent. The connection must be insulated from machine ground using silicone connector protectors or self-fusing tape to eliminate ground loop interference.

Q: What are the consequences of mismatching the 0.5-meter probe with non-compliant system cabling?

A: The Bently Nevada 3300 XL 8 mm system requires a total electrical length of either 5.0 meters or 9.0 meters between the probe tip and the proximitor sensor. Because this probe has a 0.5-meter integral cable, it must be paired with a 4.5-meter or 8.5-meter extension cable. Mismatching the total physical length alters the system inductance and capacitance, causing incorrect scale factor calibration.

Field Installation Guidelines

Mechanical Installation and Thread Engagement: Ensure the M10 x 1 threaded mounting hole is free of debris. Thread the probe body by hand to prevent cross-threading. Secure the probe using a calibrated torque wrench, ensuring the final locknut installation does not exceed the mechanical yield limits of the sensor case.
Armor and Cable Routing: Route the flexible stainless steel armor through dedicated conduits or structural channels to avoid mechanical pinching. Maintain a minimum bend radius of 25.4 mm (1.0 inch) for the armored cable to prevent internal coaxial shielding degradation.
Electrical Grounding Integration: The probe casing must be electrically isolated from the flexible armor to prevent stray currents from entering the measurement circuit. Ensure the terminal junction box housing the extension cable connection is tied to a clean instrument ground point, while keeping the probe body isolated at the machine casing interface.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.