330130-070-00-05 Bently Nevada Extension Cable

Bently Nevada 330130-070-00-05 3300 XL Series Extension Cable

Bently Nevada 330130-070-00-05 3300 XL Series Extension Cable

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330130-070-00-05, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal...

Código: 330130-070-00-05

Manufacturer: Bently Nevada
Product No.: 330130-070-00-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330130-070-00-05, also cataloged as the 330130 Extension Cable, operates as a dedicated hardware component for RF signal transmission within 3300 XL Proximitor Sensor networks. It acts as the electrical link connecting an eddy-current proximity probe to a remote transducer module, maintaining analog measurement loop parameters without introducing uncompensated impedance mismatches or signal phase shifts.

Suffix Breakdown & Model Matrix

330130 - Base Model: 3300 XL Standard Extension Cable
-070 - Cable Length Option: 7.0 metres (23.0 feet)
-00 - Connector Protector and Cable Option: Standard cable (non-armored)
-05 - Agency Approval Option: Multiple Approvals (CSA, ATEX, IECEx for hazardous locations)

Hardware Specifications

Parameter	Specification
Model	330130-070-00-05
Brand	Bently Nevada
Origin	United States
Weight	0.3 kg
Dimensions	5.3 cm x 3.2 cm x 10.0 cm (coiled envelope dimensions); 7.0 m physical cable length
Operating Temp	-51 to +177 deg C
Power Consumption	0.0 W (Passive component)
System Impedance	75.0 ohm nominal
Electrical Capacitance	69.9 pF/m (21.3 pF/ft) nominal
Minimum Bend Radius	25.4 mm (1.0 in)

Eddy-Current Probe Scaling & Cross-Talk Suppression

The physical construction of the 330130-070-00-05 extension cable provides strict shielding geometry necessary to preserve calibrated eddy-current probe scaling over the 7.0 m distance. This continuous coaxial shielding configuration ensures high-frequency cross-talk suppression when routed in proximity to adjacent machine instrumentation. Stabilizing the transmission path parameters enables consistent gap voltage validation, targeting the traditional nominal -10 VDC baseline across standard rotor dynamics monitoring applications.

Frequently Asked Questions

Q: Can this 7.0 m extension cable be interchanged with a 4.5 m cable within a standard calibrated loop?

A: No. Proximitor sensors are engineered for an exact total system electrical length (typically 5.0 m or 9.0 m). Swapping a 7.0 m cable into a loop tuned for a different parameter changes total circuit capacitance and invalidates the transducer calibration profile.

Q: What physical protection does this non-armored (-00 option) cable require when routed near raw mechanical parts?

A: Because the -00 option designates a standard non-armored jacket, the cable lacks native resistance to crushing or shearing. It must be installed inside grounded structural conduits or liquid-tight junction boxes to shield the inner dielectric from distortion.

Field Installation Guidelines

Verify that the combined electrical length of the proximity probe and the extension cable matches the fixed calibration specification printed on the Proximitor sensor label.
Maintain a minimum static bend radius of 25.4 mm along the entire routing sequence to prevent permanent physical changes to the coaxial impedance structure.
Isolate all miniature coaxial connectors from structural metalwork and conduits by fully deploying the specialized installation sleeves or applying self-fusing electrical insulation tape.
Route the non-armored line exclusively through dedicated low-voltage instrumentation channels to prevent external electromagnetic interference.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.