330930-045-00-CN Bently Nevada Extension Cable

Bently Nevada 330930-045-00-CN 3300 NSv Extension Cable

Bently Nevada 330930-045-00-CN 3300 NSv Extension Cable

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330930-045-00-CN, also cataloged as the 3300 NSv Extension Cable, operates as a dedicated hardware component for high-frequency...

Código: 330930-045-00-CN

Manufacturer: Bently Nevada
Product No.: 330930-045-00-CN
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330930-045-00-CN, also cataloged as the 3300 NSv Extension Cable, operates as a dedicated hardware component for high-frequency signal transmission between proximity probes and Proximitor sensors within 3300 NSv Proximity Transducer System networks.

Suffix Breakdown & Model Matrix

The catalog options for the 330930-045-00-CN breakdown as follows:

330930: Base Model for 3300 NSv Extension Cable
045: Cable Length Option - 4.5 meters (14.8 feet)
00: Connector and Cable Option - Without stainless steel armor
CN: Agency Approval Option - Country-specific approval (China)

Hardware Specifications

Parameter	Specification
Model	330930-045-00-CN
Brand	Bently Nevada
Origin	USA
Weight	1.5 kg (Shipping weight)
Dimensions	4.5 meters (14.8 feet) length
Operating Temp	-51 to 177 deg C (-60 to 350 deg F)
Power Consumption	Passive physical conductor (zero power dissipation)
Cable Material	75 ohm coaxial, fluoroethylene propylene (FEP) insulated
Center Conductor Resistance	0.220 ohm/m (0.067 ohm/ft)
Shield Resistance	0.066 ohm/m (0.020 ohm/ft)
Extension Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical
Armor Option	Option 00 (Without stainless steel armor)
Agency Approval	Option CN (China specific approval)

Eddy-Current Probe Scaling & Gap Voltage Validation

The 3300 NSv extension cable transfers high-frequency excitation signals between the eddy-current probe and the Proximitor sensor while maintaining strict resistance and capacitance matching (69.9 pF/m typical). Maintaining correct physical cable length is required to preserve linear eddy-current probe scaling across tight side-clearance target zones. During commissioning, gap voltage validation requires setting the static mechanical probe position until a baseline target of -10 VDC is observed across the Proximitor output terminals, establishing linear voltage response for dynamic shaft measurements.

Frequently Asked Questions

Q: How does the electrical capacitance of the extension cable affect system performance?

A: The 3300 NSv Proximitor sensor is calibrated to the total capacitance of a specific loop length. Using an unapproved cable length alters circuit capacitance (69.9 pF/m nominal) and shifts probe sensitivity scaling.

Q: What insulation material is used on the 330930 extension cable?

A: The coaxial cable uses fluoroethylene propylene (FEP) insulation, which rates for continuous thermal stability across an operating range of -51 to 177 deg C.

Field Installation Guidelines

Cable Routing: Lay the unarmored FEP coaxial cable through protective electrical conduit or dedicated instrument trays to isolate it from heavy mechanical abrasion.
Separation Distance: Maintain strict physical separation from high-voltage AC power wiring and variable frequency drive output cables to prevent electromagnetic noise induction.
Connector Alignment: Clean miniature coaxial connectors prior to mating. Push and twist ClickLoc fittings until fully latched without applying excessive axial tension.
Shield Ground Continuity: Maintain total shield coverage along the run, ensuring single-point panel termination to prevent ground loop currents across the 4.5-meter span.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.